11 Apr
2022
11 Apr
'22
1:01 a.m.
On Fri, Apr 01, 2022 at 10:42:49AM -0700, Tim Harvey wrote:
Both the GW72xx and GW73xx boards have USB1 routed to a USB OTG connector and USB2 routed to a USB hub.
The OTG connector has over-current protection with an active-low pin and the USB1 to HUB connection has no over-current protection (as the HUB itself implements this for its downstream ports).
Add proper dt nodes to specify the over-current pin polarity for USB1 and disable over-current protection for USB2.
Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits") Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey tharvey@gateworks.com
Applied, thanks!