5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman mathias.nyman@linux.intel.com
[ Upstream commit 0e6275452ce26d7ff274a5c1b15ed581a26f7986 ]
Initially resume related USB2 variables were cleared once port successfully resumed to U0. Later code was added to clean up stale resume variables in case of port failed to resume to U0.
Clear the variables in one place after port is no longer resuming or in suspended U3 state.
Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20230202150505.618915-11-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Stable-dep-of: d7cdfc319b2b ("xhci: track port suspend state correctly in unsuccessful resume cases") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/xhci-hub.c | 38 ++++++++++++++++--------------------- 1 file changed, 16 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index d3d3dadaca10b..660a7d0f79a42 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1071,7 +1071,6 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, struct xhci_bus_state *bus_state; u32 link_state; u32 portnum; - int ret;
bus_state = &port->rhub->bus_state; link_state = portsc & PORT_PLS_MASK; @@ -1087,23 +1086,30 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, if (link_state == XDEV_U2) *status |= USB_PORT_STAT_L1; if (link_state == XDEV_U0) { - if (port->resume_timestamp) - usb_hcd_end_port_resume(&port->rhub->hcd->self, - portnum); - port->resume_timestamp = 0; - clear_bit(portnum, &bus_state->resuming_ports); if (bus_state->suspended_ports & (1 << portnum)) { bus_state->suspended_ports &= ~(1 << portnum); bus_state->port_c_suspend |= 1 << portnum; } } if (link_state == XDEV_RESUME) { - ret = xhci_handle_usb2_port_link_resume(port, status, - portsc, flags); - if (ret) - return; + xhci_handle_usb2_port_link_resume(port, status, portsc, + flags); } } + + /* + * Clear usb2 resume signalling variables if port is no longer suspended + * or resuming. Port either resumed to U0/U1/U2, disconnected, or in a + * error state. Resume related variables should be cleared in all those cases. + */ + if ((link_state != XDEV_U3 && + link_state != XDEV_RESUME) && + (port->resume_timestamp || + test_bit(portnum, &bus_state->resuming_ports))) { + port->resume_timestamp = 0; + clear_bit(portnum, &bus_state->resuming_ports); + usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum); + } }
/* @@ -1158,18 +1164,6 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, else xhci_get_usb2_port_status(port, &status, raw_port_status, flags); - /* - * Clear stale usb2 resume signalling variables in case port changed - * state during resume signalling. For example on error - */ - if ((port->resume_timestamp || - test_bit(wIndex, &bus_state->resuming_ports)) && - (raw_port_status & PORT_PLS_MASK) != XDEV_U3 && - (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) { - port->resume_timestamp = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - usb_hcd_end_port_resume(&hcd->self, wIndex); - }
if (bus_state->port_c_suspend & (1 << wIndex)) status |= USB_PORT_STAT_C_SUSPEND << 16;