6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niravkumar L Rabara niravkumarlaxmidas.rabara@altera.com
commit fd3ecda38fe0cb713d167b5477d25f6b350f0514 upstream.
The OCRAM ECC is always enabled either by the BootROM or by the Secure Device Manager (SDM) during a power-on reset on SoCFPGA.
However, during a warm reset, the OCRAM content is retained to preserve data, while the control and status registers are reset to their default values. As a result, ECC must be explicitly re-enabled after a warm reset.
Fixes: 17e47dc6db4f ("EDAC/altera: Add Stratix10 OCRAM ECC support") Signed-off-by: Niravkumar L Rabara niravkumarlaxmidas.rabara@altera.com Signed-off-by: Borislav Petkov (AMD) bp@alien8.de Acked-by: Dinh Nguyen dinguyen@kernel.org Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251111080801.1279401-1-niravkumarlaxmidas.rabara@... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/edac/altera_edac.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)
--- a/drivers/edac/altera_edac.c +++ b/drivers/edac/altera_edac.c @@ -1184,10 +1184,22 @@ altr_check_ocram_deps_init(struct altr_e if (ret) return ret;
- /* Verify OCRAM has been initialized */ + /* + * Verify that OCRAM has been initialized. + * During a warm reset, OCRAM contents are retained, but the control + * and status registers are reset to their default values. Therefore, + * ECC must be explicitly re-enabled in the control register. + * Error condition: if INITCOMPLETEA is clear and ECC_EN is already set. + */ if (!ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA, - (base + ALTR_A10_ECC_INITSTAT_OFST))) - return -ENODEV; + (base + ALTR_A10_ECC_INITSTAT_OFST))) { + if (!ecc_test_bits(ALTR_A10_ECC_EN, + (base + ALTR_A10_ECC_CTRL_OFST))) + ecc_set_bits(ALTR_A10_ECC_EN, + (base + ALTR_A10_ECC_CTRL_OFST)); + else + return -ENODEV; + }
/* Enable IRQ on Single Bit Error */ writel(ALTR_A10_ECC_SERRINTEN, (base + ALTR_A10_ECC_ERRINTENS_OFST));