6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde mkl@pengutronix.de
[ Upstream commit df75470b317b46affbe1f5f8f006b34175be9789 ]
The patch 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length") increased the burst length calculation in mx51_ecspi_prepare_transfer() to be based on the transfer length.
This breaks HW CS + SPI_CS_WORD support which was added in 6e95b23a5b2d ("spi: imx: Implement support for CS_WORD") and transfers with bits-per-word != 8, 16, 32.
SPI_CS_WORD means the CS should be toggled after each word. The implementation in the imx-spi driver relies on the fact that the HW CS is toggled automatically by the controller after each burst length number of bits. Setting the burst length to the number of bits of the _whole_ message breaks this use case.
Further the patch 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length") claims to optimize the transfers. But even without this patch, on modern spi-imx controllers with "dynamic_burst = true" (imx51, imx6 and newer), the transfers are already optimized, i.e. the burst length is dynamically adjusted in spi_imx_push() to avoid the pause between the SPI bursts. This has been confirmed by a scope measurement on an imx6d.
Subsequent Patches tried to fix these and other problems:
- 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits") - e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma") - c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode") - cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
but the HW CS + SPI_CS_WORD use case is still broken.
To fix the problems revert the burst size calculation in mx51_ecspi_prepare_transfer() back to the original form, before 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length") was applied.
Cc: Stefan Moring stefan.moring@technolution.nl Cc: Stefan Bigler linux@bigler.io Cc: Clark Wang xiaoning.wang@nxp.com Cc: Carlos Song carlos.song@nxp.com Cc: Sebastian Reichel sre@kernel.org Cc: Thorsten Scherer T.Scherer@eckelmann.de Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length") Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits") Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma") Fixes: c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode") Fixes: cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length") Link: https://lore.kernel.org/all/20240618-oxpecker-of-ideal-mastery-db59f8-mkl@pe... Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Tested-by: Thorsten Scherer t.scherer@eckelmann.de Link: https://msgid.link/r/20240618-spi-imx-fix-bustlength-v1-1-2053dd5fdf87@pengu... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-imx.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 0e479c5406217..d323b37723929 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -660,18 +660,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, ctrl |= (spi_imx->target_burst * 8 - 1) << MX51_ECSPI_CTRL_BL_OFFSET; else { - if (spi_imx->usedma) { - ctrl |= (spi_imx->bits_per_word - 1) - << MX51_ECSPI_CTRL_BL_OFFSET; - } else { - if (spi_imx->count >= MX51_ECSPI_CTRL_MAX_BURST) - ctrl |= (MX51_ECSPI_CTRL_MAX_BURST * BITS_PER_BYTE - 1) - << MX51_ECSPI_CTRL_BL_OFFSET; - else - ctrl |= (spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word, - BITS_PER_BYTE) * spi_imx->bits_per_word - 1) - << MX51_ECSPI_CTRL_BL_OFFSET; - } + ctrl |= (spi_imx->bits_per_word - 1) + << MX51_ECSPI_CTRL_BL_OFFSET; }
/* set clock speed */