From: Trent Piepho tpiepho@impinj.com
[ Upstream commit 8197f489f4c4398391746a377c10501076b05168 ]
In commit 974488e4ce1e ("spi: imx: Fix failure path leak on GPIO request error"), spi_bitbang_start() was moved later in the probe sequence. But this doesn't work, as spi_bitbang_start() has to be called before requesting GPIOs because the GPIO data in the spi master is populated when the master is registed, and that doesn't happen until spi_bitbang_start() is called. The default only works if one uses one CS.
So add a failure path call to spi_bitbang_stop() to fix the leak.
CC: Shawn Guo shawnguo@kernel.org CC: Sascha Hauer kernel@pengutronix.de CC: Fabio Estevam fabio.estevam@nxp.com CC: Mark Brown broonie@kernel.org CC: Oleksij Rempel o.rempel@pengutronix.de Signed-off-by: Trent Piepho tpiepho@impinj.com Reviewed-by: Oleksij Rempel o.rempel@pengutronix.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/spi/spi-imx.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 40390d31a93b..6f57592a7f95 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1622,6 +1622,11 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->devtype_data->intctrl(spi_imx, 0);
master->dev.of_node = pdev->dev.of_node; + ret = spi_bitbang_start(&spi_imx->bitbang); + if (ret) { + dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); + goto out_clk_put; + }
/* Request GPIO CS lines, if any */ if (!spi_imx->slave_mode && master->cs_gpios) { @@ -1640,12 +1645,6 @@ static int spi_imx_probe(struct platform_device *pdev) } }
- ret = spi_bitbang_start(&spi_imx->bitbang); - if (ret) { - dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); - goto out_clk_put; - } - dev_info(&pdev->dev, "probed\n");
clk_disable(spi_imx->clk_ipg);