From: Jimmy Assarsson extja@kvaser.com
[ Upstream commit 35364f5b41a4917fe94a3f393d149b63ec583297 ]
Use the CMD_GET_CAPABILITIES_REQ command to query the device for certain capabilities. We are only interested in LISTENONLY mode and wither the device reports CAN error counters.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by: Anssi Hannula anssi.hannula@bitwise.fi Tested-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Jimmy Assarsson extja@kvaser.com Link: https://lore.kernel.org/all/20221010185237.319219-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 144 +++++++++++++++++- 1 file changed, 143 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 19958037720f..33ff62cd1729 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -74,6 +74,8 @@ #define CMD_TX_ACKNOWLEDGE 50 #define CMD_CAN_ERROR_EVENT 51 #define CMD_FLUSH_QUEUE_REPLY 68 +#define CMD_GET_CAPABILITIES_REQ 95 +#define CMD_GET_CAPABILITIES_RESP 96
#define CMD_LEAF_LOG_MESSAGE 106
@@ -83,6 +85,8 @@ #define KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK BIT(5) #define KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK BIT(6)
+#define KVASER_USB_LEAF_SWOPTION_EXT_CAP BIT(12) + /* error factors */ #define M16C_EF_ACKE BIT(0) #define M16C_EF_CRCE BIT(1) @@ -278,6 +282,28 @@ struct leaf_cmd_log_message { u8 data[8]; } __packed;
+/* Sub commands for cap_req and cap_res */ +#define KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE 0x02 +#define KVASER_USB_LEAF_CAP_CMD_ERR_REPORT 0x05 +struct kvaser_cmd_cap_req { + __le16 padding0; + __le16 cap_cmd; + __le16 padding1; + __le16 channel; +} __packed; + +/* Status codes for cap_res */ +#define KVASER_USB_LEAF_CAP_STAT_OK 0x00 +#define KVASER_USB_LEAF_CAP_STAT_NOT_IMPL 0x01 +#define KVASER_USB_LEAF_CAP_STAT_UNAVAIL 0x02 +struct kvaser_cmd_cap_res { + __le16 padding; + __le16 cap_cmd; + __le16 status; + __le32 mask; + __le32 value; +} __packed; + struct kvaser_cmd { u8 len; u8 id; @@ -295,6 +321,8 @@ struct kvaser_cmd { struct leaf_cmd_chip_state_event chip_state_event; struct leaf_cmd_error_event error_event; struct leaf_cmd_log_message log_message; + struct kvaser_cmd_cap_req cap_req; + struct kvaser_cmd_cap_res cap_res; } __packed leaf;
union { @@ -324,6 +352,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = { [CMD_LEAF_LOG_MESSAGE] = kvaser_fsize(u.leaf.log_message), [CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event), [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event), + [CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res), /* ignored events: */ [CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY, }; @@ -606,6 +635,9 @@ static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev, dev->fw_version = le32_to_cpu(softinfo->fw_version); dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx);
+ if (sw_options & KVASER_USB_LEAF_SWOPTION_EXT_CAP) + dev->card_data.capabilities |= KVASER_USB_CAP_EXT_CAP; + if (dev->driver_info->quirks & KVASER_USB_QUIRK_IGNORE_CLK_FREQ) { /* Firmware expects bittiming parameters calculated for 16MHz * clock, regardless of the actual clock @@ -693,6 +725,116 @@ static int kvaser_usb_leaf_get_card_info(struct kvaser_usb *dev) return 0; }
+static int kvaser_usb_leaf_get_single_capability(struct kvaser_usb *dev, + u16 cap_cmd_req, u16 *status) +{ + struct kvaser_usb_dev_card_data *card_data = &dev->card_data; + struct kvaser_cmd *cmd; + u32 value = 0; + u32 mask = 0; + u16 cap_cmd_res; + int err; + int i; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->id = CMD_GET_CAPABILITIES_REQ; + cmd->u.leaf.cap_req.cap_cmd = cpu_to_le16(cap_cmd_req); + cmd->len = CMD_HEADER_LEN + sizeof(struct kvaser_cmd_cap_req); + + err = kvaser_usb_send_cmd(dev, cmd, cmd->len); + if (err) + goto end; + + err = kvaser_usb_leaf_wait_cmd(dev, CMD_GET_CAPABILITIES_RESP, cmd); + if (err) + goto end; + + *status = le16_to_cpu(cmd->u.leaf.cap_res.status); + + if (*status != KVASER_USB_LEAF_CAP_STAT_OK) + goto end; + + cap_cmd_res = le16_to_cpu(cmd->u.leaf.cap_res.cap_cmd); + switch (cap_cmd_res) { + case KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE: + case KVASER_USB_LEAF_CAP_CMD_ERR_REPORT: + value = le32_to_cpu(cmd->u.leaf.cap_res.value); + mask = le32_to_cpu(cmd->u.leaf.cap_res.mask); + break; + default: + dev_warn(&dev->intf->dev, "Unknown capability command %u\n", + cap_cmd_res); + break; + } + + for (i = 0; i < dev->nchannels; i++) { + if (BIT(i) & (value & mask)) { + switch (cap_cmd_res) { + case KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE: + card_data->ctrlmode_supported |= + CAN_CTRLMODE_LISTENONLY; + break; + case KVASER_USB_LEAF_CAP_CMD_ERR_REPORT: + card_data->capabilities |= + KVASER_USB_CAP_BERR_CAP; + break; + } + } + } + +end: + kfree(cmd); + + return err; +} + +static int kvaser_usb_leaf_get_capabilities_leaf(struct kvaser_usb *dev) +{ + int err; + u16 status; + + if (!(dev->card_data.capabilities & KVASER_USB_CAP_EXT_CAP)) { + dev_info(&dev->intf->dev, + "No extended capability support. Upgrade device firmware.\n"); + return 0; + } + + err = kvaser_usb_leaf_get_single_capability(dev, + KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE, + &status); + if (err) + return err; + if (status) + dev_info(&dev->intf->dev, + "KVASER_USB_LEAF_CAP_CMD_LISTEN_MODE failed %u\n", + status); + + err = kvaser_usb_leaf_get_single_capability(dev, + KVASER_USB_LEAF_CAP_CMD_ERR_REPORT, + &status); + if (err) + return err; + if (status) + dev_info(&dev->intf->dev, + "KVASER_USB_LEAF_CAP_CMD_ERR_REPORT failed %u\n", + status); + + return 0; +} + +static int kvaser_usb_leaf_get_capabilities(struct kvaser_usb *dev) +{ + int err = 0; + + if (dev->driver_info->family == KVASER_LEAF) + err = kvaser_usb_leaf_get_capabilities_leaf(dev); + + return err; +} + static void kvaser_usb_leaf_tx_acknowledge(const struct kvaser_usb *dev, const struct kvaser_cmd *cmd) { @@ -1486,7 +1628,7 @@ const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops = { .dev_get_software_info = kvaser_usb_leaf_get_software_info, .dev_get_software_details = NULL, .dev_get_card_info = kvaser_usb_leaf_get_card_info, - .dev_get_capabilities = NULL, + .dev_get_capabilities = kvaser_usb_leaf_get_capabilities, .dev_set_opt_mode = kvaser_usb_leaf_set_opt_mode, .dev_start_chip = kvaser_usb_leaf_start_chip, .dev_stop_chip = kvaser_usb_leaf_stop_chip,