From: Matthew Hagan mnhagan88@gmail.com
[ Upstream commit 2069624dac19d62c558bb6468fe03678553ab01d ]
As noted elsewhere, various GPON SFP modules exhibit non-standard TX-fault behaviour. In the tested case, the Huawei MA5671A, when used in combination with a Marvell mv88e6085 switch, was found to persistently assert TX-fault, resulting in the module being disabled.
This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the module to function.
Change from v1: removal of erroneous return statment (Andrew Lunn)
Signed-off-by: Matthew Hagan mnhagan88@gmail.com Reviewed-by: Andrew Lunn andrew@lunn.ch Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/sfp.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 4720b24ca51b..90dfefc1f5f8 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -250,6 +250,7 @@ struct sfp { struct sfp_eeprom_id id; unsigned int module_power_mW; unsigned int module_t_start_up; + bool tx_fault_ignore;
#if IS_ENABLED(CONFIG_HWMON) struct sfp_diag diag; @@ -1945,6 +1946,12 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) else sfp->module_t_start_up = T_START_UP;
+ if (!memcmp(id.base.vendor_name, "HUAWEI ", 16) && + !memcmp(id.base.vendor_pn, "MA5671A ", 16)) + sfp->tx_fault_ignore = true; + else + sfp->tx_fault_ignore = false; + return 0; }
@@ -2397,7 +2404,10 @@ static void sfp_check_state(struct sfp *sfp) mutex_lock(&sfp->st_mutex); state = sfp_get_state(sfp); changed = state ^ sfp->state; - changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; + if (sfp->tx_fault_ignore) + changed &= SFP_F_PRESENT | SFP_F_LOS; + else + changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
for (i = 0; i < GPIO_MAX; i++) if (changed & BIT(i))