From: Stefan Wahren stefan.wahren@i2se.com
[ Upstream commit 5f30dacf37bc93308e91e4d0fc94681ca73f0f91 ]
Fix the node names for the GPIO LEDs to conform to the standard node name led-..
Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2s... Signed-off-by: Nicolas Saenz Julienne nsaenz@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 ++-- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 4 ++-- arch/arm/boot/dts/bcm2835-rpi-a.dts | 2 +- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 4 ++-- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 2 +- arch/arm/boot/dts/bcm2835-rpi-b.dts | 2 +- arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi | 2 +- arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 +- arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 +- arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 4 ++-- arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 4 ++-- arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 4 ++-- arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 2 +- arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 2 +- 15 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 3b4ab947492a..27d2f859adfc 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -29,11 +29,11 @@ };
leds { - act { + led-act { gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; };
- pwr { + led-pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 6c8ce39833bf..40b9405f1a8e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -14,11 +14,11 @@ };
leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; };
- pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 17fdd48346ff..11edb581dbaf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -14,7 +14,7 @@ };
leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index b0355c229cdc..1b435c64bd9c 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -15,11 +15,11 @@ };
leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; };
- pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 33b3b5c02521..a23c25c00eea 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -15,7 +15,7 @@ };
leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 2b69957e0113..1b63d6b19750 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -15,7 +15,7 @@ };
leds { - act { + led-act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi index 58059c2ce129..e4e6b6abbfc1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi @@ -5,7 +5,7 @@
/ { leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index f65448c01e31..33b2b77aa47d 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -23,7 +23,7 @@ };
leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 6dd93c6f4966..6f9b3a908f28 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -18,7 +18,7 @@ };
leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index d94357b21f7e..87ddcad76083 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -4,7 +4,7 @@ leds { compatible = "gpio-leds";
- act { + led-act { label = "ACT"; default-state = "keep"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 0455a680394a..d8af8eeac7b6 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -15,11 +15,11 @@ };
leds { - act { + led-act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; };
- pwr { + led-pwr { label = "PWR"; gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index 28be0332c1c8..77099a7871b0 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -19,11 +19,11 @@ };
leds { - act { + led-act { gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; };
- pwr { + led-pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 37343148643d..61010266ca9a 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -20,11 +20,11 @@ };
leds { - act { + led-act { gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; };
- pwr { + led-pwr { label = "PWR"; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; default-state = "keep"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 054ecaa355c9..dd4a48604097 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -20,7 +20,7 @@ };
leds { - act { + led-act { gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 925cb37c22f0..828a20561b96 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -14,7 +14,7 @@ * Since there is no upstream GPIO driver yet, * remove the incomplete node. */ - /delete-node/ act; + /delete-node/ led-act; };
reg_3v3: fixed-regulator {