Add the missing endpoint sanity checks to probe() to avoid division by zero in mwifiex_write_data_sync() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing).
Only add checks for the firmware-download boot stage, which require both command endpoints, for now. The driver looks like it will handle a missing endpoint during normal operation without oopsing, albeit not very gracefully as it will try to submit URBs to the default pipe and fail.
Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")).
Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Cc: stable@vger.kernel.org # 3.5 Cc: Amitkumar Karwar akarwar@marvell.com Signed-off-by: Johan Hovold johan@kernel.org --- drivers/net/wireless/marvell/mwifiex/usb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c index 426e39d4ccf0..9736aa0ab7fd 100644 --- a/drivers/net/wireless/marvell/mwifiex/usb.c +++ b/drivers/net/wireless/marvell/mwifiex/usb.c @@ -505,6 +505,22 @@ static int mwifiex_usb_probe(struct usb_interface *intf, } }
+ switch (card->usb_boot_state) { + case USB8XXX_FW_DNLD: + /* Reject broken descriptors. */ + if (!card->rx_cmd_ep || !card->tx_cmd_ep) + return -ENODEV; + if (card->bulk_out_maxpktsize == 0) + return -ENODEV; + break; + case USB8XXX_FW_READY: + /* Assume the driver can handle missing endpoints for now. */ + break; + default: + WARN_ON(1); + return -ENODEV; + } + usb_set_intfdata(intf, card);
ret = mwifiex_add_card(card, &card->fw_done, &usb_ops,