From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit d8594fa22a3f7c294639d9aa2959d63e66d9437c ]
We have #defines for all the individual sensor registers and value/mask pairs #defined at the top of the file and used at exactly one spot.
This is usually good if the #defines give a meaning to the opaque magic numbers.
However in this case, the semantic meaning is inherent in the name of the C99-addressable fields, and that means duplication of information, and only makes the code hard to maintain since you every time have to add a new #define AND update the site where it is to be used.
Get rid of the #defines and just open code the values into the appropriate struct elements. Make sure to explicitly address the .hz and .value fields in the st_sensor_odr_avl struct so that the meaning of all values is clear.
This patch is purely syntactic should have no semantic effect.
Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Jonathan Cameron jic23@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/gyro/st_gyro_core.c | 205 ++++++++++---------------------- 1 file changed, 66 insertions(+), 139 deletions(-)
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index aea034d8fe0fb..2a42b3d583e85 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -39,79 +39,6 @@ #define ST_GYRO_FS_AVL_500DPS 500 #define ST_GYRO_FS_AVL_2000DPS 2000
-/* CUSTOM VALUES FOR SENSOR 1 */ -#define ST_GYRO_1_WAI_EXP 0xd3 -#define ST_GYRO_1_ODR_ADDR 0x20 -#define ST_GYRO_1_ODR_MASK 0xc0 -#define ST_GYRO_1_ODR_AVL_100HZ_VAL 0x00 -#define ST_GYRO_1_ODR_AVL_200HZ_VAL 0x01 -#define ST_GYRO_1_ODR_AVL_400HZ_VAL 0x02 -#define ST_GYRO_1_ODR_AVL_800HZ_VAL 0x03 -#define ST_GYRO_1_PW_ADDR 0x20 -#define ST_GYRO_1_PW_MASK 0x08 -#define ST_GYRO_1_FS_ADDR 0x23 -#define ST_GYRO_1_FS_MASK 0x30 -#define ST_GYRO_1_FS_AVL_250_VAL 0x00 -#define ST_GYRO_1_FS_AVL_500_VAL 0x01 -#define ST_GYRO_1_FS_AVL_2000_VAL 0x02 -#define ST_GYRO_1_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750) -#define ST_GYRO_1_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500) -#define ST_GYRO_1_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000) -#define ST_GYRO_1_BDU_ADDR 0x23 -#define ST_GYRO_1_BDU_MASK 0x80 -#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22 -#define ST_GYRO_1_DRDY_IRQ_INT2_MASK 0x08 -#define ST_GYRO_1_MULTIREAD_BIT true - -/* CUSTOM VALUES FOR SENSOR 2 */ -#define ST_GYRO_2_WAI_EXP 0xd4 -#define ST_GYRO_2_ODR_ADDR 0x20 -#define ST_GYRO_2_ODR_MASK 0xc0 -#define ST_GYRO_2_ODR_AVL_95HZ_VAL 0x00 -#define ST_GYRO_2_ODR_AVL_190HZ_VAL 0x01 -#define ST_GYRO_2_ODR_AVL_380HZ_VAL 0x02 -#define ST_GYRO_2_ODR_AVL_760HZ_VAL 0x03 -#define ST_GYRO_2_PW_ADDR 0x20 -#define ST_GYRO_2_PW_MASK 0x08 -#define ST_GYRO_2_FS_ADDR 0x23 -#define ST_GYRO_2_FS_MASK 0x30 -#define ST_GYRO_2_FS_AVL_250_VAL 0x00 -#define ST_GYRO_2_FS_AVL_500_VAL 0x01 -#define ST_GYRO_2_FS_AVL_2000_VAL 0x02 -#define ST_GYRO_2_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750) -#define ST_GYRO_2_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500) -#define ST_GYRO_2_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000) -#define ST_GYRO_2_BDU_ADDR 0x23 -#define ST_GYRO_2_BDU_MASK 0x80 -#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22 -#define ST_GYRO_2_DRDY_IRQ_INT2_MASK 0x08 -#define ST_GYRO_2_MULTIREAD_BIT true - -/* CUSTOM VALUES FOR SENSOR 3 */ -#define ST_GYRO_3_WAI_EXP 0xd7 -#define ST_GYRO_3_ODR_ADDR 0x20 -#define ST_GYRO_3_ODR_MASK 0xc0 -#define ST_GYRO_3_ODR_AVL_95HZ_VAL 0x00 -#define ST_GYRO_3_ODR_AVL_190HZ_VAL 0x01 -#define ST_GYRO_3_ODR_AVL_380HZ_VAL 0x02 -#define ST_GYRO_3_ODR_AVL_760HZ_VAL 0x03 -#define ST_GYRO_3_PW_ADDR 0x20 -#define ST_GYRO_3_PW_MASK 0x08 -#define ST_GYRO_3_FS_ADDR 0x23 -#define ST_GYRO_3_FS_MASK 0x30 -#define ST_GYRO_3_FS_AVL_250_VAL 0x00 -#define ST_GYRO_3_FS_AVL_500_VAL 0x01 -#define ST_GYRO_3_FS_AVL_2000_VAL 0x02 -#define ST_GYRO_3_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750) -#define ST_GYRO_3_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500) -#define ST_GYRO_3_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000) -#define ST_GYRO_3_BDU_ADDR 0x23 -#define ST_GYRO_3_BDU_MASK 0x80 -#define ST_GYRO_3_DRDY_IRQ_ADDR 0x22 -#define ST_GYRO_3_DRDY_IRQ_INT2_MASK 0x08 -#define ST_GYRO_3_MULTIREAD_BIT true - - static const struct iio_chan_spec st_gyro_16bit_channels[] = { ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), @@ -130,7 +57,7 @@ static const struct iio_chan_spec st_gyro_16bit_channels[] = {
static const struct st_sensor_settings st_gyro_sensors_settings[] = { { - .wai = ST_GYRO_1_WAI_EXP, + .wai = 0xd3, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = L3G4200D_GYRO_DEV_NAME, @@ -138,18 +65,18 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { }, .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, .odr = { - .addr = ST_GYRO_1_ODR_ADDR, - .mask = ST_GYRO_1_ODR_MASK, + .addr = 0x20, + .mask = 0xc0, .odr_avl = { - { 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, }, - { 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, }, - { 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, }, - { 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, }, + { .hz = 100, .value = 0x00, }, + { .hz = 200, .value = 0x01, }, + { .hz = 400, .value = 0x02, }, + { .hz = 800, .value = 0x03, }, }, }, .pw = { - .addr = ST_GYRO_1_PW_ADDR, - .mask = ST_GYRO_1_PW_MASK, + .addr = 0x20, + .mask = 0x08, .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, @@ -158,33 +85,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .mask = ST_SENSORS_DEFAULT_AXIS_MASK, }, .fs = { - .addr = ST_GYRO_1_FS_ADDR, - .mask = ST_GYRO_1_FS_MASK, + .addr = 0x23, + .mask = 0x30, .fs_avl = { [0] = { .num = ST_GYRO_FS_AVL_250DPS, - .value = ST_GYRO_1_FS_AVL_250_VAL, - .gain = ST_GYRO_1_FS_AVL_250_GAIN, + .value = 0x00, + .gain = IIO_DEGREE_TO_RAD(8750), }, [1] = { .num = ST_GYRO_FS_AVL_500DPS, - .value = ST_GYRO_1_FS_AVL_500_VAL, - .gain = ST_GYRO_1_FS_AVL_500_GAIN, + .value = 0x01, + .gain = IIO_DEGREE_TO_RAD(17500), }, [2] = { .num = ST_GYRO_FS_AVL_2000DPS, - .value = ST_GYRO_1_FS_AVL_2000_VAL, - .gain = ST_GYRO_1_FS_AVL_2000_GAIN, + .value = 0x02, + .gain = IIO_DEGREE_TO_RAD(70000), }, }, }, .bdu = { - .addr = ST_GYRO_1_BDU_ADDR, - .mask = ST_GYRO_1_BDU_MASK, + .addr = 0x23, + .mask = 0x80, }, .drdy_irq = { - .addr = ST_GYRO_1_DRDY_IRQ_ADDR, - .mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK, + .addr = 0x22, + .mask_int2 = 0x08, /* * The sensor has IHL (active low) and open * drain settings, but only for INT1 and not @@ -192,11 +119,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { */ .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, - .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT, + .multi_read_bit = true, .bootime = 2, }, { - .wai = ST_GYRO_2_WAI_EXP, + .wai = 0xd4, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = L3GD20_GYRO_DEV_NAME, @@ -208,18 +135,18 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { }, .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, .odr = { - .addr = ST_GYRO_2_ODR_ADDR, - .mask = ST_GYRO_2_ODR_MASK, + .addr = 0x20, + .mask = 0xc0, .odr_avl = { - { 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, }, - { 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, }, - { 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, }, - { 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, }, + { .hz = 95, .value = 0x00, }, + { .hz = 190, .value = 0x01, }, + { .hz = 380, .value = 0x02, }, + { .hz = 760, .value = 0x03, }, }, }, .pw = { - .addr = ST_GYRO_2_PW_ADDR, - .mask = ST_GYRO_2_PW_MASK, + .addr = 0x20, + .mask = 0x08, .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, @@ -228,33 +155,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .mask = ST_SENSORS_DEFAULT_AXIS_MASK, }, .fs = { - .addr = ST_GYRO_2_FS_ADDR, - .mask = ST_GYRO_2_FS_MASK, + .addr = 0x23, + .mask = 0x30, .fs_avl = { [0] = { .num = ST_GYRO_FS_AVL_250DPS, - .value = ST_GYRO_2_FS_AVL_250_VAL, - .gain = ST_GYRO_2_FS_AVL_250_GAIN, + .value = 0x00, + .gain = IIO_DEGREE_TO_RAD(8750), }, [1] = { .num = ST_GYRO_FS_AVL_500DPS, - .value = ST_GYRO_2_FS_AVL_500_VAL, - .gain = ST_GYRO_2_FS_AVL_500_GAIN, + .value = 0x01, + .gain = IIO_DEGREE_TO_RAD(17500), }, [2] = { .num = ST_GYRO_FS_AVL_2000DPS, - .value = ST_GYRO_2_FS_AVL_2000_VAL, - .gain = ST_GYRO_2_FS_AVL_2000_GAIN, + .value = 0x02, + .gain = IIO_DEGREE_TO_RAD(70000), }, }, }, .bdu = { - .addr = ST_GYRO_2_BDU_ADDR, - .mask = ST_GYRO_2_BDU_MASK, + .addr = 0x23, + .mask = 0x80, }, .drdy_irq = { - .addr = ST_GYRO_2_DRDY_IRQ_ADDR, - .mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK, + .addr = 0x22, + .mask_int2 = 0x08, /* * The sensor has IHL (active low) and open * drain settings, but only for INT1 and not @@ -262,29 +189,29 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { */ .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, - .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT, + .multi_read_bit = true, .bootime = 2, }, { - .wai = ST_GYRO_3_WAI_EXP, + .wai = 0xd7, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = L3GD20_GYRO_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, .odr = { - .addr = ST_GYRO_3_ODR_ADDR, - .mask = ST_GYRO_3_ODR_MASK, + .addr = 0x20, + .mask = 0xc0, .odr_avl = { - { 95, ST_GYRO_3_ODR_AVL_95HZ_VAL, }, - { 190, ST_GYRO_3_ODR_AVL_190HZ_VAL, }, - { 380, ST_GYRO_3_ODR_AVL_380HZ_VAL, }, - { 760, ST_GYRO_3_ODR_AVL_760HZ_VAL, }, + { .hz = 95, .value = 0x00, }, + { .hz = 190, .value = 0x01, }, + { .hz = 380, .value = 0x02, }, + { .hz = 760, .value = 0x03, }, }, }, .pw = { - .addr = ST_GYRO_3_PW_ADDR, - .mask = ST_GYRO_3_PW_MASK, + .addr = 0x20, + .mask = 0x08, .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE, .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, }, @@ -293,33 +220,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .mask = ST_SENSORS_DEFAULT_AXIS_MASK, }, .fs = { - .addr = ST_GYRO_3_FS_ADDR, - .mask = ST_GYRO_3_FS_MASK, + .addr = 0x23, + .mask = 0x30, .fs_avl = { [0] = { .num = ST_GYRO_FS_AVL_250DPS, - .value = ST_GYRO_3_FS_AVL_250_VAL, - .gain = ST_GYRO_3_FS_AVL_250_GAIN, + .value = 0x00, + .gain = IIO_DEGREE_TO_RAD(8750), }, [1] = { .num = ST_GYRO_FS_AVL_500DPS, - .value = ST_GYRO_3_FS_AVL_500_VAL, - .gain = ST_GYRO_3_FS_AVL_500_GAIN, + .value = 0x01, + .gain = IIO_DEGREE_TO_RAD(17500), }, [2] = { .num = ST_GYRO_FS_AVL_2000DPS, - .value = ST_GYRO_3_FS_AVL_2000_VAL, - .gain = ST_GYRO_3_FS_AVL_2000_GAIN, + .value = 0x02, + .gain = IIO_DEGREE_TO_RAD(70000), }, }, }, .bdu = { - .addr = ST_GYRO_3_BDU_ADDR, - .mask = ST_GYRO_3_BDU_MASK, + .addr = 0x23, + .mask = 0x80, }, .drdy_irq = { - .addr = ST_GYRO_3_DRDY_IRQ_ADDR, - .mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK, + .addr = 0x22, + .mask_int2 = 0x08, /* * The sensor has IHL (active low) and open * drain settings, but only for INT1 and not @@ -327,7 +254,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { */ .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, - .multi_read_bit = ST_GYRO_3_MULTIREAD_BIT, + .multi_read_bit = true, .bootime = 2, }, };