On Tue, Nov 03, 2020 at 09:55:45AM +0100, Neil Armstrong wrote:
On 03/11/2020 02:18, Sasha Levin wrote:
From: Neil Armstrong narmstrong@baylibre.com
[ Upstream commit 1b208bab34dc3f4ef8f408105017d4a7b72b2a2f ]
This adds the USB Glue node, with the USB2 & USB3 controllers along the single USB2 PHY node.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com Reviewed-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Sasha Levin sashal@kernel.org
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b9efc8469265d..fae48efae83e9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -171,6 +171,46 @@ soc { #size-cells = <2>; ranges;
usb: usb@ffe09080 {compatible = "amlogic,meson-axg-usb-ctrl";reg = <0x0 0xffe09080 0x0 0x20>;interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;#address-cells = <2>;#size-cells = <2>;ranges;clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;clock-names = "usb_ctrl", "ddr";resets = <&reset RESET_USB_OTG>;dr_mode = "otg";phys = <&usb2_phy1>;phy-names = "usb2-phy1";dwc2: usb@ff400000 {compatible = "amlogic,meson-g12a-usb", "snps,dwc2";reg = <0x0 0xff400000 0x0 0x40000>;interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;clocks = <&clkc CLKID_USB1>;clock-names = "otg";phys = <&usb2_phy1>;dr_mode = "peripheral";g-rx-fifo-size = <192>;g-np-tx-fifo-size = <128>;g-tx-fifo-size = <128 128 16 16 16>;};dwc3: usb@ff500000 {compatible = "snps,dwc3";reg = <0x0 0xff500000 0x0 0x100000>;interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;dr_mode = "host";maximum-speed = "high-speed";snps,dis_u2_susphy_quirk;};};- ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a",
@@ -1734,6 +1774,16 @@ sd_emmc_c: mmc@7000 { clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_C>; };
usb2_phy1: phy@9020 {compatible = "amlogic,meson-gxl-usb2-phy";#phy-cells = <0>;reg = <0x0 0x9020 0x0 0x20>;clocks = <&clkc CLKID_USB>;clock-names = "phy";resets = <&reset RESET_USB_OTG>;reset-names = "phy";};};
sram: sram@fffc0000 {
Hi Sasha,
This needs also support in the dwc3-meson-g12a driver, you can drop it from backport.
Dropped, thanks!