From: Grygorii Strashko grygorii.strashko@ti.com
[ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ]
When users set flow control using ethtool the bits are set properly in the CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size reset value. When receive flow control is enabled on a port, the port's associated FIFO block allocation must be adjusted. The port RX allocation must increase to accommodate the flow control runout. The TRM recommends numbers of 5 or 6.
Hence, apply required Port FIFO configuration to Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during interface initialization.
Cc: Schuyler Patton spatton@ti.com Signed-off-by: Grygorii Strashko grygorii.strashko@ti.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/ti/cpsw.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 3f1971d485f3..024191a3ce91 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -282,6 +282,10 @@ struct cpsw_ss_regs { /* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */ #define CPSW_V1_SEQ_ID_OFS_SHIFT 16
+#define CPSW_MAX_BLKS_TX 15 +#define CPSW_MAX_BLKS_TX_SHIFT 4 +#define CPSW_MAX_BLKS_RX 5 + struct cpsw_host_regs { u32 max_blks; u32 blk_cnt; @@ -1159,11 +1163,23 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) switch (cpsw->version) { case CPSW_VERSION_1: slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP); + /* Increase RX FIFO size to 5 for supporting fullduplex + * flow control mode + */ + slave_write(slave, + (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) | + CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS); break; case CPSW_VERSION_2: case CPSW_VERSION_3: case CPSW_VERSION_4: slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP); + /* Increase RX FIFO size to 5 for supporting fullduplex + * flow control mode + */ + slave_write(slave, + (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) | + CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS); break; }