This is a note to let you know that I've just added the patch titled
MIPS: ralink: Fix booting on MT7621
to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git%3Ba=su...
The filename of the patch is: mips-ralink-fix-booting-on-mt7621.patch and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From a63d706ea719190a79a6c769e898f70680044d3e Mon Sep 17 00:00:00 2001
From: NeilBrown neil@brown.name Date: Wed, 21 Mar 2018 14:02:10 +1100 Subject: MIPS: ralink: Fix booting on MT7621
From: NeilBrown neil@brown.name
commit a63d706ea719190a79a6c769e898f70680044d3e upstream.
Since commit 3af5a67c86a3 ("MIPS: Fix early CM probing") the MT7621 has not been able to boot.
This commit caused mips_cm_probe() to be called before mt7621.c::proc_soc_init().
prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out the bootloader config" and means that configuration registers are no longer available. It has some code to re-enable this config.
Before this re-enable code is run, the sysc register cannot be read, so when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and panic() is called.
If we move the config-repair code to the top of prom_soc_init(), the registers can be read and boot can proceed.
Very occasionally, the first register read after the reconfiguration returns garbage, so add a call to __sync().
Fixes: 3af5a67c86a3 ("MIPS: Fix early CM probing") Signed-off-by: NeilBrown neil@brown.name Reviewed-by: Matt Redfearn matt.redfearn@mips.com Cc: John Crispin john@phrozen.org Cc: Ralf Baechle ralf@linux-mips.org Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 4.5+ Patchwork: https://patchwork.linux-mips.org/patch/18859/ Signed-off-by: James Hogan jhogan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/mips/ralink/mt7621.c | 42 ++++++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 20 deletions(-)
--- a/arch/mips/ralink/mt7621.c +++ b/arch/mips/ralink/mt7621.c @@ -170,6 +170,28 @@ void prom_soc_init(struct ralink_soc_inf u32 n1; u32 rev;
+ /* Early detection of CMP support */ + mips_cm_probe(); + mips_cpc_probe(); + + if (mips_cps_numiocu(0)) { + /* + * mips_cm_probe() wipes out bootloader + * config for CM regions and we have to configure them + * again. This SoC cannot talk to pamlbus devices + * witout proper iocu region set up. + * + * FIXME: it would be better to do this with values + * from DT, but we need this very early because + * without this we cannot talk to pretty much anything + * including serial. + */ + write_gcr_reg0_base(MT7621_PALMBUS_BASE); + write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | + CM_GCR_REGn_MASK_CMTGT_IOCU0); + __sync(); + } + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
@@ -194,26 +216,6 @@ void prom_soc_init(struct ralink_soc_inf
rt2880_pinmux_data = mt7621_pinmux_data;
- /* Early detection of CMP support */ - mips_cm_probe(); - mips_cpc_probe(); - - if (mips_cps_numiocu(0)) { - /* - * mips_cm_probe() wipes out bootloader - * config for CM regions and we have to configure them - * again. This SoC cannot talk to pamlbus devices - * witout proper iocu region set up. - * - * FIXME: it would be better to do this with values - * from DT, but we need this very early because - * without this we cannot talk to pretty much anything - * including serial. - */ - write_gcr_reg0_base(MT7621_PALMBUS_BASE); - write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | - CM_GCR_REGn_MASK_CMTGT_IOCU0); - }
if (!register_cps_smp_ops()) return;
Patches currently in stable-queue which might be from neil@brown.name are
queue-4.14/mips-ralink-fix-booting-on-mt7621.patch queue-4.14/mips-ralink-remove-ralink_halt.patch