From: Henning Schild henning.schild@siemens.com
[ Upstream commit 3002b8642f016d7fe3ff56240dacea1075f6b877 ]
In fact the device with chip id 0xD283 is called NCT6126D, and that is the chip id the Nuvoton code was written for. Correct that name to avoid confusion, because a NCT6116D in fact exists as well but has another chip id, and is currently not supported.
The look at the spec also revealed that GPIO group7 in fact has 8 pins, so correct the pin count in that group as well.
Fixes: d0918a84aff0 ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116") Reported-by: Xing Tong Wu xingtong.wu@siemens.com Signed-off-by: Henning Schild henning.schild@siemens.com Acked-by: Simon Guinot simon.guinot@sequanux.org Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/Kconfig | 2 +- drivers/gpio/gpio-f7188x.c | 28 ++++++++++++++-------------- 2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e3af86f06c630..3e8e5f4ffa59f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -882,7 +882,7 @@ config GPIO_F7188X help This option enables support for GPIOs found on Fintek Super-I/O chips F71869, F71869A, F71882FG, F71889F and F81866. - As well as Nuvoton Super-I/O chip NCT6116D. + As well as Nuvoton Super-I/O chip NCT6126D.
To compile this driver as a module, choose M here: the module will be called f7188x-gpio. diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c index 9effa7769bef5..f54ca5a1775ea 100644 --- a/drivers/gpio/gpio-f7188x.c +++ b/drivers/gpio/gpio-f7188x.c @@ -48,7 +48,7 @@ /* * Nuvoton devices. */ -#define SIO_NCT6116D_ID 0xD283 /* NCT6116D chipset ID */ +#define SIO_NCT6126D_ID 0xD283 /* NCT6126D chipset ID */
#define SIO_LD_GPIO_NUVOTON 0x07 /* GPIO logical device */
@@ -62,7 +62,7 @@ enum chips { f81866, f81804, f81865, - nct6116d, + nct6126d, };
static const char * const f7188x_names[] = { @@ -74,7 +74,7 @@ static const char * const f7188x_names[] = { "f81866", "f81804", "f81865", - "nct6116d", + "nct6126d", };
struct f7188x_sio { @@ -187,8 +187,8 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset, /* Output mode register (0:open drain 1:push-pull). */ #define f7188x_gpio_out_mode(base) ((base) + 3)
-#define f7188x_gpio_dir_invert(type) ((type) == nct6116d) -#define f7188x_gpio_data_single(type) ((type) == nct6116d) +#define f7188x_gpio_dir_invert(type) ((type) == nct6126d) +#define f7188x_gpio_data_single(type) ((type) == nct6126d)
static struct f7188x_gpio_bank f71869_gpio_bank[] = { F7188X_GPIO_BANK(0, 6, 0xF0, DRVNAME "-0"), @@ -274,7 +274,7 @@ static struct f7188x_gpio_bank f81865_gpio_bank[] = { F7188X_GPIO_BANK(60, 5, 0x90, DRVNAME "-6"), };
-static struct f7188x_gpio_bank nct6116d_gpio_bank[] = { +static struct f7188x_gpio_bank nct6126d_gpio_bank[] = { F7188X_GPIO_BANK(0, 8, 0xE0, DRVNAME "-0"), F7188X_GPIO_BANK(10, 8, 0xE4, DRVNAME "-1"), F7188X_GPIO_BANK(20, 8, 0xE8, DRVNAME "-2"), @@ -282,7 +282,7 @@ static struct f7188x_gpio_bank nct6116d_gpio_bank[] = { F7188X_GPIO_BANK(40, 8, 0xF0, DRVNAME "-4"), F7188X_GPIO_BANK(50, 8, 0xF4, DRVNAME "-5"), F7188X_GPIO_BANK(60, 8, 0xF8, DRVNAME "-6"), - F7188X_GPIO_BANK(70, 1, 0xFC, DRVNAME "-7"), + F7188X_GPIO_BANK(70, 8, 0xFC, DRVNAME "-7"), };
static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) @@ -490,9 +490,9 @@ static int f7188x_gpio_probe(struct platform_device *pdev) data->nr_bank = ARRAY_SIZE(f81865_gpio_bank); data->bank = f81865_gpio_bank; break; - case nct6116d: - data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank); - data->bank = nct6116d_gpio_bank; + case nct6126d: + data->nr_bank = ARRAY_SIZE(nct6126d_gpio_bank); + data->bank = nct6126d_gpio_bank; break; default: return -ENODEV; @@ -559,9 +559,9 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio) case SIO_F81865_ID: sio->type = f81865; break; - case SIO_NCT6116D_ID: + case SIO_NCT6126D_ID: sio->device = SIO_LD_GPIO_NUVOTON; - sio->type = nct6116d; + sio->type = nct6126d; break; default: pr_info("Unsupported Fintek device 0x%04x\n", devid); @@ -569,7 +569,7 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio) }
/* double check manufacturer where possible */ - if (sio->type != nct6116d) { + if (sio->type != nct6126d) { manid = superio_inw(addr, SIO_FINTEK_MANID); if (manid != SIO_FINTEK_ID) { pr_debug("Not a Fintek device at 0x%08x\n", addr); @@ -581,7 +581,7 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio) err = 0;
pr_info("Found %s at %#x\n", f7188x_names[sio->type], (unsigned int)addr); - if (sio->type != nct6116d) + if (sio->type != nct6126d) pr_info(" revision %d\n", superio_inb(addr, SIO_FINTEK_DEVREV));
err: