6.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josua Mayer josua@solid-run.com
[ Upstream commit e2b69180431968250bf3c0c581155f1b37d057c1 ]
SolidRun HummingBoard-T has two options for M.2 connector, supporting either PCI-E or USB-3.1 Gen 1 - depending on configuration of a mux on the serdes lane. The required configurations in device-tree were modeled as overlays.
The USB-3.1 overlay uses /delete-property/ to unset a boolean property on the usb controller limiting it to USB-2.0 by default. Overlays can not delete a property from the base dtb, therefore this overlay is at this time useless.
Convert both overlays into full dts by including the base board dts. While the pcie overlay was functional, both are converted for a consistent user experience when selecting between the two mutually exclusive configurations.
Reported-by: Geert Uytterhoeven geert@linux-m68k.org Closes: https://lore.kernel.org/linux-devicetree/CAMuHMdXTgpTnJ9U7egC2XjFXXNZ5uiY1O+... Fixes: bbef42084cc1 ("arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3") Signed-off-by: Josua Mayer josua@solid-run.com Link: https://lore.kernel.org/r/20250101-am64-hb-fix-overlay-v2-1-78143f5da28c@sol... Signed-off-by: Nishanth Menon nm@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/ti/Makefile | 4 ---- ...-pcie.dtso => k3-am642-hummingboard-t-pcie.dts} | 14 ++++++++------ ...-usb3.dtso => k3-am642-hummingboard-t-usb3.dts} | 13 ++++++++----- 3 files changed, 16 insertions(+), 15 deletions(-) rename arch/arm64/boot/dts/ti/{k3-am642-hummingboard-t-pcie.dtso => k3-am642-hummingboard-t-pcie.dts} (78%) rename arch/arm64/boot/dts/ti/{k3-am642-hummingboard-t-usb3.dtso => k3-am642-hummingboard-t-usb3.dts} (74%)
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 379bfa4425d49..2b3b48a9a8842 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -42,10 +42,6 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
# Boards with AM64x SoC -k3-am642-hummingboard-t-pcie-dtbs := \ - k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-pcie.dtbo -k3-am642-hummingboard-t-usb3-dtbs := \ - k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-usb3.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts similarity index 78% rename from arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso rename to arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts index bd9a5caf20da5..023b2a6aaa566 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts @@ -2,17 +2,19 @@ /* * Copyright (C) 2023 Josua Mayer josua@solid-run.com * - * Overlay for SolidRun AM642 HummingBoard-T to enable PCI-E. + * DTS for SolidRun AM642 HummingBoard-T, + * running on Cortex A53, with PCI-E. + * */
-/dts-v1/; -/plugin/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/phy/phy.h> +#include "k3-am642-hummingboard-t.dts"
#include "k3-serdes.h"
+/ { + model = "SolidRun AM642 HummingBoard-T with PCI-E"; +}; + &pcie0_rc { pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_pins>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts similarity index 74% rename from arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso rename to arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts index ffcc3bd3c7bc5..ee9bd618f3701 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts @@ -2,16 +2,19 @@ /* * Copyright (C) 2023 Josua Mayer josua@solid-run.com * - * Overlay for SolidRun AM642 HummingBoard-T to enable USB-3.1. + * DTS for SolidRun AM642 HummingBoard-T, + * running on Cortex A53, with USB-3.1 Gen 1. + * */
-/dts-v1/; -/plugin/; - -#include <dt-bindings/phy/phy.h> +#include "k3-am642-hummingboard-t.dts"
#include "k3-serdes.h"
+/ { + model = "SolidRun AM642 HummingBoard-T with USB-3.1 Gen 1"; +}; + &serdes0 { #address-cells = <1>; #size-cells = <0>;