From: Mian Yousaf Kaukab ykaukab@suse.de
commit 804741ac7b9f2fdebe3740cb0579cb8d94d49e60 upstream.
Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") netsec_netdev_init() power downs phy before resetting the controller. However, the state is not restored once the reset is complete. As a result it is not possible to bring up network on a platform with Broadcom BCM5482 phy.
Fix the issue by restoring phy power state after controller reset is complete.
Fixes: 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") Cc: stable@vger.kernel.org Signed-off-by: Mian Yousaf Kaukab ykaukab@suse.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/socionext/netsec.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -1718,14 +1718,17 @@ static int netsec_netdev_init(struct net goto err1;
/* set phy power down */ - data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR) | - BMCR_PDOWN; - netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data); + data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR); + netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, + data | BMCR_PDOWN);
ret = netsec_reset_hardware(priv, true); if (ret) goto err2;
+ /* Restore phy power state */ + netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data); + spin_lock_init(&priv->desc_ring[NETSEC_RING_TX].lock); spin_lock_init(&priv->desc_ring[NETSEC_RING_RX].lock);