5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse dwmw@amazon.co.uk
commit 531b2ca0a940ac9db03f246c8b77c4201de72b00 upstream.
According to the data sheet, writing the MODE register should stop the counter (and thus the interrupts). This appears to work on real hardware, at least modern Intel and AMD systems. It should also work on Hyper-V.
However, on some buggy virtual machines the mode change doesn't have any effect until the counter is subsequently loaded (or perhaps when the IRQ next fires).
So, set MODE 0 and then load the counter, to ensure that those buggy VMs do the right thing and the interrupts stop. And then write MODE 0 *again* to stop the counter on compliant implementations too.
Apparently, Hyper-V keeps firing the IRQ *repeatedly* even in mode zero when it should only happen once, but the second MODE write stops that too.
Userspace test program (mostly written by tglx): ===== #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <stdint.h> #include <sys/io.h>
static __always_inline void __out##bwl(type value, uint16_t port) \ { \ asm volatile("out" #bwl " %" #bw "0, %w1" \ : : "a"(value), "Nd"(port)); \ } \ \ static __always_inline type __in##bwl(uint16_t port) \ { \ type value; \ asm volatile("in" #bwl " %w1, %" #bw "0" \ : "=a"(value) : "Nd"(port)); \ return value; \ }
BUILDIO(b, b, uint8_t)
#define inb __inb #define outb __outb
#define PIT_MODE 0x43 #define PIT_CH0 0x40 #define PIT_CH2 0x42
static int is8254;
static void dump_pit(void) { if (is8254) { // Latch and output counter and status outb(0xC2, PIT_MODE); printf("%02x %02x %02x\n", inb(PIT_CH0), inb(PIT_CH0), inb(PIT_CH0)); } else { // Latch and output counter outb(0x0, PIT_MODE); printf("%02x %02x\n", inb(PIT_CH0), inb(PIT_CH0)); } }
int main(int argc, char* argv[]) { int nr_counts = 2;
if (argc > 1) nr_counts = atoi(argv[1]);
if (argc > 2) is8254 = 1;
if (ioperm(0x40, 4, 1) != 0) return 1;
dump_pit();
printf("Set oneshot\n"); outb(0x38, PIT_MODE); outb(0x00, PIT_CH0); outb(0x0F, PIT_CH0);
dump_pit(); usleep(1000); dump_pit();
printf("Set periodic\n"); outb(0x34, PIT_MODE); outb(0x00, PIT_CH0); outb(0x0F, PIT_CH0);
dump_pit(); usleep(1000); dump_pit(); dump_pit(); usleep(100000); dump_pit(); usleep(100000); dump_pit();
printf("Set stop (%d counter writes)\n", nr_counts); outb(0x30, PIT_MODE); while (nr_counts--) outb(0xFF, PIT_CH0);
dump_pit(); usleep(100000); dump_pit(); usleep(100000); dump_pit();
printf("Set MODE 0\n"); outb(0x30, PIT_MODE);
dump_pit(); usleep(100000); dump_pit(); usleep(100000); dump_pit();
return 0; } =====
Suggested-by: Sean Christopherson seanjc@google.com Co-developed-by: Li RongQing lirongqing@baidu.com Signed-off-by: Li RongQing lirongqing@baidu.com Signed-off-by: David Woodhouse dwmw@amazon.co.uk Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Michael Kelley mhkelley@outlook.com Link: https://lore.kernel.org/all/20240802135555.564941-2-dwmw2@infradead.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kernel/cpu/mshyperv.c | 11 ----------- drivers/clocksource/i8253.c | 36 +++++++++++++++++++++++++----------- include/linux/i8253.h | 1 - 3 files changed, 25 insertions(+), 23 deletions(-)
--- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -16,7 +16,6 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/kexec.h> -#include <linux/i8253.h> #include <linux/random.h> #include <asm/processor.h> #include <asm/hypervisor.h> @@ -389,16 +388,6 @@ static void __init ms_hyperv_init_platfo if (efi_enabled(EFI_BOOT)) x86_platform.get_nmi_reason = hv_get_nmi_reason;
- /* - * Hyper-V VMs have a PIT emulation quirk such that zeroing the - * counter register during PIT shutdown restarts the PIT. So it - * continues to interrupt @18.2 HZ. Setting i8253_clear_counter - * to false tells pit_shutdown() not to zero the counter so that - * the PIT really is shutdown. Generation 2 VMs don't have a PIT, - * and setting this value has no effect. - */ - i8253_clear_counter_on_shutdown = false; - #if IS_ENABLED(CONFIG_HYPERV) /* * Setup the hook to get control post apic initialization. --- a/drivers/clocksource/i8253.c +++ b/drivers/clocksource/i8253.c @@ -20,13 +20,6 @@ DEFINE_RAW_SPINLOCK(i8253_lock); EXPORT_SYMBOL(i8253_lock);
-/* - * Handle PIT quirk in pit_shutdown() where zeroing the counter register - * restarts the PIT, negating the shutdown. On platforms with the quirk, - * platform specific code can set this to false. - */ -bool i8253_clear_counter_on_shutdown __ro_after_init = true; - #ifdef CONFIG_CLKSRC_I8253 /* * Since the PIT overflows every tick, its not very useful @@ -112,12 +105,33 @@ void clockevent_i8253_disable(void) { raw_spin_lock(&i8253_lock);
+ /* + * Writing the MODE register should stop the counter, according to + * the datasheet. This appears to work on real hardware (well, on + * modern Intel and AMD boxes; I didn't dig the Pegasos out of the + * shed). + * + * However, some virtual implementations differ, and the MODE change + * doesn't have any effect until either the counter is written (KVM + * in-kernel PIT) or the next interrupt (QEMU). And in those cases, + * it may not stop the *count*, only the interrupts. Although in + * the virt case, that probably doesn't matter, as the value of the + * counter will only be calculated on demand if the guest reads it; + * it's the interrupts which cause steal time. + * + * Hyper-V apparently has a bug where even in mode 0, the IRQ keeps + * firing repeatedly if the counter is running. But it *does* do the + * right thing when the MODE register is written. + * + * So: write the MODE and then load the counter, which ensures that + * the IRQ is stopped on those buggy virt implementations. And then + * write the MODE again, which is the right way to stop it. + */ outb_p(0x30, PIT_MODE); + outb_p(0, PIT_CH0); + outb_p(0, PIT_CH0);
- if (i8253_clear_counter_on_shutdown) { - outb_p(0, PIT_CH0); - outb_p(0, PIT_CH0); - } + outb_p(0x30, PIT_MODE);
raw_spin_unlock(&i8253_lock); } --- a/include/linux/i8253.h +++ b/include/linux/i8253.h @@ -21,7 +21,6 @@ #define PIT_LATCH ((PIT_TICK_RATE + HZ/2) / HZ)
extern raw_spinlock_t i8253_lock; -extern bool i8253_clear_counter_on_shutdown; extern struct clock_event_device i8253_clockevent; extern void clockevent_i8253_init(bool oneshot); extern void clockevent_i8253_disable(void);