6.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Volodymyr Babchuk Volodymyr_Babchuk@epam.com
commit 819fe8c96a5172dfd960e5945e8f00f8fed32953 upstream.
There are two issues with SDHC2 configuration for SA8155P-ADP, which prevent use of SDHC2 and causes issues with ethernet:
- Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC TX. If sdhc driver probes after dwmac driver, it reconfigures gpio4 and this breaks Ethernet MAC.
- pinctrl configuration mentions gpio96 as CD pin. It seems it was copied from some SM8150 example, because as mentioned above, correct CD pin is gpio4 on PMM8155AU_1.
This patch fixes both mentioned issues by providing correct pin handle and pinctrl configuration.
Fixes: 0deb2624e2d0 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card") Cc: stable@vger.kernel.org Signed-off-by: Volodymyr Babchuk volodymyr_babchuk@epam.com Reviewed-by: Stephan Gerhold stephan@gerhold.net Link: https://lore.kernel.org/r/20240412190310.1647893-1-volodymyr_babchuk@epam.co... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-)
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -367,6 +367,16 @@ }; };
+&pmm8155au_1_gpios { + pmm8155au_1_sdc2_cd: sdc2-cd-default-state { + pins = "gpio4"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -384,10 +394,10 @@ &sdhc_2 { status = "okay";
- cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; + pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>; + pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>; vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ bus-width = <4>; @@ -505,13 +515,6 @@ bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; };
sdc2_off: sdc2-off-state { @@ -532,13 +535,6 @@ bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; };
usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {