From: Terry Bowman terry.bowman@amd.com
commit abd71a948f7aab47ca49d3e7fe6afa6c48c8aae0 upstream.
Refactor driver's timer initialization into new function. This is needed inorder to support adding new device layouts while using common timer initialization.
Co-developed-by: Robert Richter rrichter@amd.com Signed-off-by: Robert Richter rrichter@amd.com Signed-off-by: Terry Bowman terry.bowman@amd.com Tested-by: Jean Delvare jdelvare@suse.de Reviewed-by: Jean Delvare jdelvare@suse.de Reviewed-by: Guenter Roeck linux@roeck-us.net Link: https://lore.kernel.org/r/20220202153525.1693378-2-terry.bowman@amd.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@linux-watchdog.org Cc: Mario Limonciello Mario.Limonciello@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/watchdog/sp5100_tco.c | 65 +++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 29 deletions(-)
--- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -215,6 +215,41 @@ static u32 sp5100_tco_read_pm_reg32(u8 i return val; }
+static int sp5100_tco_timer_init(struct sp5100_tco *tco) +{ + struct watchdog_device *wdd = &tco->wdd; + struct device *dev = wdd->parent; + u32 val; + + val = readl(SP5100_WDT_CONTROL(tco->tcobase)); + if (val & SP5100_WDT_DISABLED) { + dev_err(dev, "Watchdog hardware is disabled\n"); + return -ENODEV; + } + + /* + * Save WatchDogFired status, because WatchDogFired flag is + * cleared here. + */ + if (val & SP5100_WDT_FIRED) + wdd->bootstatus = WDIOF_CARDRESET; + + /* Set watchdog action to reset the system */ + val &= ~SP5100_WDT_ACTION_RESET; + writel(val, SP5100_WDT_CONTROL(tco->tcobase)); + + /* Set a reasonable heartbeat before we stop the timer */ + tco_timer_set_timeout(wdd, wdd->timeout); + + /* + * Stop the TCO before we change anything so we don't race with + * a zeroed timer. + */ + tco_timer_stop(wdd); + + return 0; +} + static int sp5100_tco_setupdevice(struct device *dev, struct watchdog_device *wdd) { @@ -340,35 +375,7 @@ static int sp5100_tco_setupdevice(struct /* Setup the watchdog timer */ tco_timer_enable(tco);
- val = readl(SP5100_WDT_CONTROL(tco->tcobase)); - if (val & SP5100_WDT_DISABLED) { - dev_err(dev, "Watchdog hardware is disabled\n"); - ret = -ENODEV; - goto unreg_region; - } - - /* - * Save WatchDogFired status, because WatchDogFired flag is - * cleared here. - */ - if (val & SP5100_WDT_FIRED) - wdd->bootstatus = WDIOF_CARDRESET; - /* Set watchdog action to reset the system */ - val &= ~SP5100_WDT_ACTION_RESET; - writel(val, SP5100_WDT_CONTROL(tco->tcobase)); - - /* Set a reasonable heartbeat before we stop the timer */ - tco_timer_set_timeout(wdd, wdd->timeout); - - /* - * Stop the TCO before we change anything so we don't race with - * a zeroed timer. - */ - tco_timer_stop(wdd); - - release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); - - return 0; + ret = sp5100_tco_timer_init(tco);
unreg_region: release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);