From: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com
commit f38278e9b810b06aff2981d505267be984423ba3 upstream.
serial core expects the spinlock to be initialized by the controller driver for serial console, this patch makes sure the spinlock is initialized, fixing the below issue:
[ 0.865928] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 0.865945] lock: sci_ports+0x0/0x4c80, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 0.865955] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc1+ #112 [ 0.865961] Hardware name: HopeRun HiHope RZ/G2H with sub board (DT) [ 0.865968] Call trace: [ 0.865979] dump_backtrace+0x0/0x1d8 [ 0.865985] show_stack+0x14/0x20 [ 0.865996] dump_stack+0xe8/0x130 [ 0.866006] spin_dump+0x6c/0x88 [ 0.866012] do_raw_spin_lock+0xb0/0xf8 [ 0.866023] _raw_spin_lock_irqsave+0x80/0xa0 [ 0.866032] uart_add_one_port+0x3a4/0x4e0 [ 0.866039] sci_probe+0x504/0x7c8 [ 0.866048] platform_drv_probe+0x50/0xa0 [ 0.866059] really_probe+0xdc/0x330 [ 0.866066] driver_probe_device+0x58/0xb8 [ 0.866072] device_driver_attach+0x6c/0x90 [ 0.866078] __driver_attach+0x88/0xd0 [ 0.866085] bus_for_each_dev+0x74/0xc8 [ 0.866091] driver_attach+0x20/0x28 [ 0.866098] bus_add_driver+0x14c/0x1f8 [ 0.866104] driver_register+0x60/0x110 [ 0.866109] __platform_driver_register+0x40/0x48 [ 0.866119] sci_init+0x2c/0x34 [ 0.866127] do_one_initcall+0x88/0x428 [ 0.866137] kernel_init_freeable+0x2c0/0x328 [ 0.866143] kernel_init+0x10/0x108 [ 0.866150] ret_from_fork+0x10/0x18
Signed-off-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Reviewed-by: Biju Das biju.das.jz@bp.renesas.com Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/1593618100-2151-1-git-send-email-prabhakar.mahadev... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/tty/serial/sh-sci.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3301,6 +3301,9 @@ static int sci_probe_single(struct platf sciport->port.flags |= UPF_HARD_FLOW; }
+ if (sci_uart_driver.cons->index == sciport->port.line) + spin_lock_init(&sciport->port.lock); + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); if (ret) { sci_cleanup_single(sciport);