commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra SDMMC hawdware for data timeout to achive better timeout than using SDCLK and using TMCLK is recommended.
USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or SDCLK for data timeout.
Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used for data timeout by Tegra SDMMC hardware and having TMCLK not enabled is not recommended.
So, this patch fixes it.
Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Cc: stable stable@vger.kernel.org # 5.4 Acked-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Sowjanya Komatineni skomatineni@nvidia.com --- drivers/mmc/host/sdhci-tegra.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 31ed321..c0b9405 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -140,6 +140,7 @@ struct sdhci_tegra_autocal_offsets { struct sdhci_tegra { const struct sdhci_tegra_soc_data *soc_data; struct gpio_desc *power_gpio; + struct clk *tmclk; bool ddr_signaling; bool pad_calib_required; bool pad_control_available; @@ -1611,6 +1612,44 @@ static int sdhci_tegra_probe(struct platform_device *pdev) goto err_power_req; }
+ /* + * Tegra210 has a separate SDMMC_LEGACY_TM clock used for host + * timeout clock and SW can choose TMCLK or SDCLK for hardware + * data timeout through the bit USE_TMCLK_FOR_DATA_TIMEOUT of + * the register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL. + * + * USE_TMCLK_FOR_DATA_TIMEOUT bit default is set to 1 and SDMMC uses + * 12Mhz TMCLK which is advertised in host capability register. + * With TMCLK of 12Mhz provides maximum data timeout period that can + * be achieved is 11s better than using SDCLK for data timeout. + * + * So, TMCLK is set to 12Mhz and kept enabled all the time on SoC's + * supporting SDR104 mode and when not using SDCLK for data timeout. + */ + + if ((soc_data->nvquirks & NVQUIRK_ENABLE_SDR104) && + !(soc_data->pdata->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { + clk = devm_clk_get(&pdev->dev, "tmclk"); + if (IS_ERR(clk)) { + rc = PTR_ERR(clk); + if (rc == -EPROBE_DEFER) + goto err_power_req; + + dev_warn(&pdev->dev, "failed to get tmclk: %d\n", rc); + clk = NULL; + } + + clk_set_rate(clk, 12000000); + rc = clk_prepare_enable(clk); + if (rc) { + dev_err(&pdev->dev, + "failed to enable tmclk: %d\n", rc); + goto err_power_req; + } + + tegra_host->tmclk = clk; + } + clk = devm_clk_get(mmc_dev(host->mmc), NULL); if (IS_ERR(clk)) { rc = PTR_ERR(clk); @@ -1654,6 +1693,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev) err_rst_get: clk_disable_unprepare(pltfm_host->clk); err_clk_get: + clk_disable_unprepare(tegra_host->tmclk); err_power_req: err_parse_dt: sdhci_pltfm_free(pdev); @@ -1671,6 +1711,7 @@ static int sdhci_tegra_remove(struct platform_device *pdev) reset_control_assert(tegra_host->rst); usleep_range(2000, 4000); clk_disable_unprepare(pltfm_host->clk); + clk_disable_unprepare(tegra_host->tmclk);
sdhci_pltfm_free(pdev);