This fixes a couple of different problems, that can cause RTC (alarm) irqs to be missing when generating UIE interrupts.
The first commit fixes a long-standing problem, which has been documented in a comment since 2010. This fixes a race that could cause UIE irqs to stop being generated, which was easily reproduced by timing the use of RTC_UIE_ON ioctl with the seconds tick in the RTC.
The last commit ensures that RTC (alarm) irqs are enabled whenever RTC_UIE_ON ioctl is used.
The driver specific commits avoids kernel warnings about unbalanced enable_irq/disable_irq, which gets triggered on first RTC_UIE_ON with the last commit. Before this series, the same warning should be seen on initial RTC_AIE_ON with those drivers.
Signed-off-by: Esben Haabendal esben@geanix.com --- Esben Haabendal (6): rtc: interface: Fix long-standing race when setting alarm rtc: isl12022: Fix initial enable_irq/disable_irq balance rtc: cpcap: Fix initial enable_irq/disable_irq balance rtc: st-lpc: Fix initial enable_irq/disable_irq balance rtc: tps6586x: Fix initial enable_irq/disable_irq balance rtc: interface: Ensure alarm irq is enabled when UIE is enabled
drivers/rtc/interface.c | 27 +++++++++++++++++++++++++++ drivers/rtc/rtc-cpcap.c | 1 + drivers/rtc/rtc-isl12022.c | 1 + drivers/rtc/rtc-st-lpc.c | 1 + drivers/rtc/rtc-tps6586x.c | 1 + 5 files changed, 31 insertions(+) --- base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37 change-id: 20241203-rtc-uie-irq-fixes-f2838782d0f8
Best regards,