6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erick Shepherd erick.shepherd@ni.com
[ Upstream commit 31e75ed964582257f59156ce6a42860e1ae4cc39 ]
The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be lowered to less than 0.5V for a minimum of 1 ms when powering off a card. Increase wait to 15 ms so that voltage has time to drain down to 0.5V and cards can power off correctly. Issues with voltage drain time were only observed on Apollo Lake and Bay Trail host controllers so this fix is limited to those devices.
Signed-off-by: Erick Shepherd erick.shepherd@ni.com Acked-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/20250314195021.1588090-1-erick.shepherd@ni.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci-pci-core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 5a5cc40d4bc37..c71d9956b398d 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -613,8 +613,12 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
sdhci_set_power(host, mode, vdd);
- if (mode == MMC_POWER_OFF) + if (mode == MMC_POWER_OFF) { + if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_APL_SD || + slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BYT_SD) + usleep_range(15000, 17500); return; + }
/* * Bus power might not enable after D3 -> D0 transition due to the