[ Upstream commit 0d34dfbf3023cf119b83f6470692c0b10c832495 ]
Full-speed and low-speed USB devices do not work with Tegra210 platforms because of incorrect PLLU/PLLU_OUT1 clock settings.
When full-speed device is connected: [ 14.059886] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 14.196295] usb 1-3: device descriptor read/64, error -71 [ 14.436311] usb 1-3: device descriptor read/64, error -71 [ 14.675749] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 14.812335] usb 1-3: device descriptor read/64, error -71 [ 15.052316] usb 1-3: device descriptor read/64, error -71 [ 15.164799] usb usb1-port3: attempt power cycle
When low-speed device is connected: [ 37.610949] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 38.557376] usb usb1-port3: Cannot enable. Maybe the USB cable is bad? [ 38.564977] usb usb1-port3: attempt power cycle
This commit fixes the issue by: 1. initializing PLLU_OUT1 before initializing XUSB_FS_SRC clock because PLLU_OUT1 is parent of XUSB_FS_SRC. 2. changing PLLU post-divider to /2 (DIVP=1) according to Technical Reference Manual.
Fixes: e745f992cf4b ("clk: tegra: Rework pll_u") Signed-off-by: JC Kuo jckuo@nvidia.com Acked-By: Peter De Schrijver pdeschrijver@nvidia.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/tegra/clk-tegra210.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c index b92867814e2d5..cb2be154db3bc 100644 --- a/drivers/clk/tegra/clk-tegra210.c +++ b/drivers/clk/tegra/clk-tegra210.c @@ -2057,9 +2057,9 @@ static struct div_nmp pllu_nmp = { };
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { - { 12000000, 480000000, 40, 1, 0, 0 }, - { 13000000, 480000000, 36, 1, 0, 0 }, /* actual: 468.0 MHz */ - { 38400000, 480000000, 25, 2, 0, 0 }, + { 12000000, 480000000, 40, 1, 1, 0 }, + { 13000000, 480000000, 36, 1, 1, 0 }, /* actual: 468.0 MHz */ + { 38400000, 480000000, 25, 2, 1, 0 }, { 0, 0, 0, 0, 0, 0 }, };
@@ -2983,6 +2983,7 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA210_CLK_DFLL_REF, TEGRA210_CLK_PLL_P, 51000000, 1 }, { TEGRA210_CLK_SBC4, TEGRA210_CLK_PLL_P, 12000000, 1 }, { TEGRA210_CLK_PLL_RE_VCO, TEGRA210_CLK_CLK_MAX, 672000000, 1 }, + { TEGRA210_CLK_PLL_U_OUT1, TEGRA210_CLK_CLK_MAX, 48000000, 1 }, { TEGRA210_CLK_XUSB_GATE, TEGRA210_CLK_CLK_MAX, 0, 1 }, { TEGRA210_CLK_XUSB_SS_SRC, TEGRA210_CLK_PLL_U_480M, 120000000, 0 }, { TEGRA210_CLK_XUSB_FS_SRC, TEGRA210_CLK_PLL_U_48M, 48000000, 0 }, @@ -3008,7 +3009,6 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA210_CLK_PLL_DP, TEGRA210_CLK_CLK_MAX, 270000000, 0 }, { TEGRA210_CLK_SOC_THERM, TEGRA210_CLK_PLL_P, 51000000, 0 }, { TEGRA210_CLK_CCLK_G, TEGRA210_CLK_CLK_MAX, 0, 1 }, - { TEGRA210_CLK_PLL_U_OUT1, TEGRA210_CLK_CLK_MAX, 48000000, 1 }, { TEGRA210_CLK_PLL_U_OUT2, TEGRA210_CLK_CLK_MAX, 60000000, 1 }, /* This MUST be the last entry. */ { TEGRA210_CLK_CLK_MAX, TEGRA210_CLK_CLK_MAX, 0, 0 },