If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled.
A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de --- drivers/tty/serial/stm32-usart.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 8c66abcfe6ca..2bea1d7c9858 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -849,6 +849,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; u32 sr; unsigned int size; + irqreturn_t ret = IRQ_NONE;
sr = readl_relaxed(port->membase + ofs->isr);
@@ -857,11 +858,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) (sr & USART_SR_TC)) { stm32_usart_tc_interrupt_disable(port); stm32_usart_rs485_rts_disable(port); + ret = IRQ_HANDLED; }
- if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) + if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) { writel_relaxed(USART_ICR_RTOCF, port->membase + ofs->icr); + ret = IRQ_HANDLED; + }
if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) { /* Clear wake up flag and disable wake up interrupt */ @@ -870,6 +874,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) pm_wakeup_event(tport->tty->dev, 0); + ret = IRQ_HANDLED; }
/* @@ -884,6 +889,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_unlock_and_check_sysrq(port); if (size) tty_flip_buffer_push(tport); + ret = IRQ_HANDLED; } }
@@ -891,6 +897,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_port_lock(port); stm32_usart_transmit_chars(port); uart_port_unlock(port); + ret = IRQ_HANDLED; }
/* Receiver timeout irq for DMA RX */ @@ -900,9 +907,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_unlock_and_check_sysrq(port); if (size) tty_flip_buffer_push(tport); + ret = IRQ_HANDLED; }
- return IRQ_HANDLED; + return ret; }
static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl)