From: Mario Kleiner mario.kleiner.de@gmail.com
[ Upstream commit dec9de2ada523b344eb2428abfedf9d6cd0a0029 ]
This fixes a problem found on the MacBookPro 2017 Retina panel:
The panel reports 10 bpc color depth in its EDID, and the firmware chooses link settings at boot which support enough bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2 aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports 2.7 Gbps (multiplier value 0xa) as possible, in direct contradiction of what the firmware successfully set up.
This restricts the panel to 8 bpc, not providing the full color depth of the panel on Linux <= 5.5. Additionally, commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' introduced into Linux 5.6-rc1 will unclamp panel depth to its full 10 bpc, thereby requiring a eDP bandwidth for all modes that exceeds the bandwidth available and causes all modes to fail validation -> No modes for the laptop panel -> failure to set any mode -> Panel goes dark.
This patch adds a quirk specific to the MBP 2017 15" Retina panel to override reported max link rate to the correct maximum of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display precision.
Please apply for Linux 5.6+ to avoid regressing Apple MBP panel support.
Signed-off-by: Mario Kleiner mario.kleiner.de@gmail.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 122249da03ab7..a4928854a3de5 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -2440,6 +2440,17 @@ static bool retrieve_link_cap(struct dc_link *link) sink_id.ieee_device_id, sizeof(sink_id.ieee_device_id));
+ /* Quirk Apple MBP 2017 15" Retina panel: Wrong DP_MAX_LINK_RATE */ + { + uint8_t str_mbp_2017[] = { 101, 68, 21, 101, 98, 97 }; + + if ((link->dpcd_caps.sink_dev_id == 0x0010fa) && + !memcmp(link->dpcd_caps.sink_dev_id_str, str_mbp_2017, + sizeof(str_mbp_2017))) { + link->reported_link_cap.link_rate = 0x0c; + } + } + core_link_read_dpcd( link, DP_SINK_HW_REVISION_START,