From: Hal Feng hal.feng@starfivetech.com
[ Upstream commit 3f097adb9b6c804636bcf8d01e0e7bc037bee0d3 ]
JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a long time of debugging and testing, we found that setting Rx clock gating control signal to normal power consumption mode can solve this problem.
Signed-off-by: Hal Feng hal.feng@starfivetech.com Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/starfive/phy-jh7110-usb.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c index cb5454fbe2c8f..b505d89860b43 100644 --- a/drivers/phy/starfive/phy-jh7110-usb.c +++ b/drivers/phy/starfive/phy-jh7110-usb.c @@ -18,6 +18,8 @@ #include <linux/usb/of.h>
#define USB_125M_CLK_RATE 125000000 +#define USB_CLK_MODE_OFF 0x0 +#define USB_CLK_MODE_RX_NORMAL_PWR BIT(1) #define USB_LS_KEEPALIVE_OFF 0x4 #define USB_LS_KEEPALIVE_ENABLE BIT(4)
@@ -78,6 +80,7 @@ static int jh7110_usb2_phy_init(struct phy *_phy) { struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); int ret; + unsigned int val;
ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE); if (ret) @@ -87,6 +90,10 @@ static int jh7110_usb2_phy_init(struct phy *_phy) if (ret) return ret;
+ val = readl(phy->regs + USB_CLK_MODE_OFF); + val |= USB_CLK_MODE_RX_NORMAL_PWR; + writel(val, phy->regs + USB_CLK_MODE_OFF); + return 0; }