From: Tobias Schramm t.schramm@manjaro.org
[ Upstream commit 47e4dc4e63e1dcb8eec01c4214bcefc248eb72ed ]
Commit 46060be6d840 ("clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll") changed the audio pll on the Allwinner V3s and V3 SoCs to use sigma-delta modulation. In the process the declaration of fixed postdivider providing "pll-audio" was adjusted to provide the desired clock rates from the now sigma-delta modulated pll. However, while the divider used for calculations by the clock framework was adjusted the actual divider programmed into the hardware in sun8i_v3_v3s_ccu_init was left at "divide by four". This broke the "pll-audio" clock, now only providing quater the expected clock rate. It would in general be desirable to program the postdivider for "pll-audio" to four, such that a broader range of frequencies were available on the pll outputs. But the clock for the integrated codec "ac-dig" does not feature a mux that allows to select from all pll outputs as it is just a simple clock gate connected to "pll-audio". Thus we need to set the postdivider to one to be able to provide the 22.5792MHz and 24.576MHz rates required by the internal sun4i codec.
This patches fixes the incorrect clock rate by forcing the postdivider to one in sun8i_v3_v3s_ccu_init.
Fixes: 46060be6d840 ("clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll") Signed-off-by: Tobias Schramm t.schramm@manjaro.org Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://lore.kernel.org/r/20210513131315.2059451-1-t.schramm@manjaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c index a774942cb153..f49724a22540 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c @@ -817,10 +817,10 @@ static void __init sun8i_v3_v3s_ccu_init(struct device_node *node, return; }
- /* Force the PLL-Audio-1x divider to 4 */ + /* Force the PLL-Audio-1x divider to 1 */ val = readl(reg + SUN8I_V3S_PLL_AUDIO_REG); val &= ~GENMASK(19, 16); - writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG); + writel(val, reg + SUN8I_V3S_PLL_AUDIO_REG);
sunxi_ccu_probe(node, reg, ccu_desc); }