6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Karlman jonas@kwiboo.se
[ Upstream commit 19a1d46bd699940a496d3b0d4e142ef99834988c ]
inno_write is used to configure 0xaa reg, that also hold the POST_PLL_POWER_DOWN bit. When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not taken into consideration.
Fix this by keeping the power down bit until configuration is complete. Also reorder the reg write order for consistency.
Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Jonas Karlman jonas@kwiboo.se Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c index 15a008a1ac7b9..2556caf475c0c 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c @@ -1023,9 +1023,10 @@ inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno,
inno_write(inno, 0xac, RK3328_POST_PLL_FB_DIV_7_0(cfg->fbdiv)); if (cfg->postdiv == 1) { - inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS); inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) | RK3328_POST_PLL_PRE_DIV(cfg->prediv)); + inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS | + RK3328_POST_PLL_POWER_DOWN); } else { v = (cfg->postdiv / 2) - 1; v &= RK3328_POST_PLL_POST_DIV_MASK; @@ -1033,7 +1034,8 @@ inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno, inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) | RK3328_POST_PLL_PRE_DIV(cfg->prediv)); inno_write(inno, 0xaa, RK3328_POST_PLL_POST_DIV_ENABLE | - RK3328_POST_PLL_REFCLK_SEL_TMDS); + RK3328_POST_PLL_REFCLK_SEL_TMDS | + RK3328_POST_PLL_POWER_DOWN); }
for (v = 0; v < 14; v++)