From: Aric Cyr Aric.Cyr@amd.com
[why] Updating the cursor enablement register can be a slow operation and accumulates when high polling rate cursors cause frequent updates asynchronously to the cursor position.
[how] Since the cursor enable bit is cached there is no need to update the enablement register if there is no change to it. This removes the read-modify-write from the cursor position programming path in HUBP and DPP, leaving only the register writes.
Cc: Mario Limonciello mario.limonciello@amd.com Cc: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Reviewed-by: Sung Lee sung.lee@amd.com Signed-off-by: Aric Cyr Aric.Cyr@amd.com Signed-off-by: Wayne Lin wayne.lin@amd.com --- drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c | 7 ++++--- .../gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c | 6 ++++-- drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c | 8 +++++--- .../gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c | 10 ++++++---- 4 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c b/drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c index e1da48b05d00..8f6529a98f31 100644 --- a/drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c +++ b/drivers/gpu/drm/amd/display/dc/dpp/dcn10/dcn10_dpp.c @@ -480,10 +480,11 @@ void dpp1_set_cursor_position( if (src_y_offset + cursor_height <= 0) cur_en = 0; /* not visible beyond top edge*/
- REG_UPDATE(CURSOR0_CONTROL, - CUR0_ENABLE, cur_en); + if (dpp_base->pos.cur0_ctl.bits.cur0_enable != cur_en) { + REG_UPDATE(CURSOR0_CONTROL, CUR0_ENABLE, cur_en);
- dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en; + dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en; + } }
void dpp1_cnv_set_optional_cursor_attributes( diff --git a/drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c b/drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c index 3b6ca7974e18..1236e0f9a256 100644 --- a/drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c +++ b/drivers/gpu/drm/amd/display/dc/dpp/dcn401/dcn401_dpp_cm.c @@ -154,9 +154,11 @@ void dpp401_set_cursor_position( struct dcn401_dpp *dpp = TO_DCN401_DPP(dpp_base); uint32_t cur_en = pos->enable ? 1 : 0;
- REG_UPDATE(CURSOR0_CONTROL, CUR0_ENABLE, cur_en); + if (dpp_base->pos.cur0_ctl.bits.cur0_enable != cur_en) { + REG_UPDATE(CURSOR0_CONTROL, CUR0_ENABLE, cur_en);
- dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en; + dpp_base->pos.cur0_ctl.bits.cur0_enable = cur_en; + } }
void dpp401_set_optional_cursor_attributes( diff --git a/drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c b/drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c index c74f6a3313a2..d537d0c53cf0 100644 --- a/drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c +++ b/drivers/gpu/drm/amd/display/dc/hubp/dcn20/dcn20_hubp.c @@ -1058,11 +1058,13 @@ void hubp2_cursor_set_position( if (src_y_offset + cursor_height <= 0) cur_en = 0; /* not visible beyond top edge*/
- if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0) - hubp->funcs->set_cursor_attributes(hubp, &hubp->curs_attr); + if (hubp->pos.cur_ctl.bits.cur_enable != cur_en) { + if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0) + hubp->funcs->set_cursor_attributes(hubp, &hubp->curs_attr);
- REG_UPDATE(CURSOR_CONTROL, + REG_UPDATE(CURSOR_CONTROL, CURSOR_ENABLE, cur_en); + }
REG_SET_2(CURSOR_POSITION, 0, CURSOR_X_POSITION, pos->x, diff --git a/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c b/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c index 28ceceaf9e31..03bfa902dc01 100644 --- a/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c +++ b/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c @@ -742,11 +742,13 @@ void hubp401_cursor_set_position( dc_fixpt_from_int(dst_x_offset), param->h_scale_ratio));
- if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0) - hubp->funcs->set_cursor_attributes(hubp, &hubp->curs_attr); + if (hubp->pos.cur_ctl.bits.cur_enable != cur_en) { + if (cur_en && REG_READ(CURSOR_SURFACE_ADDRESS) == 0) + hubp->funcs->set_cursor_attributes(hubp, &hubp->curs_attr);
- REG_UPDATE(CURSOR_CONTROL, - CURSOR_ENABLE, cur_en); + REG_UPDATE(CURSOR_CONTROL, + CURSOR_ENABLE, cur_en); + }
REG_SET_2(CURSOR_POSITION, 0, CURSOR_X_POSITION, x_pos,