From: Martin Kaiser martin@kaiser.cx
commit 12c6223fc1804fd9295dc50d358294539b4a4184 upstream.
Using an InterTech DMG-02 dongle, the led remains on when the system goes into standby mode. After wakeup, it's no longer possible to control the led.
It turned out that the register settings to enable or disable the led were not correct. They worked for some dongles like the Edimax V2 but not for others like the InterTech DMG-02.
This patch fixes the register settings. Bit 3 in the led_cfg2 register controls the led status, bit 5 must always be set to be able to control the led, bit 6 has no influence on the led. Setting the mac_pinmux_cfg register is not necessary.
These settings were tested with Edimax V2 and InterTech DMG-02.
Cc: stable@vger.kernel.org Fixes: 8cd574e6af54 ("staging: r8188eu: introduce new hal dir for RTL8188eu driver") Suggested-by: Michael Straube straube.linux@gmail.com Signed-off-by: Martin Kaiser martin@kaiser.cx Tested-by: Michael Straube straube.linux@gmail.com # InterTech DMG-02, Tested-by: Philipp Hortmann philipp.g.hortmann@gmail.com # Edimax N150 Link: https://lore.kernel.org/r/20221015151115.232095-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/staging/r8188eu/core/rtw_led.c | 25 ++----------------------- 1 file changed, 2 insertions(+), 23 deletions(-)
--- a/drivers/staging/r8188eu/core/rtw_led.c +++ b/drivers/staging/r8188eu/core/rtw_led.c @@ -32,40 +32,19 @@ static void ResetLedStatus(struct led_pr
static void SwLedOn(struct adapter *padapter, struct led_priv *pLed) { - u8 LedCfg; - int res; - if (padapter->bDriverStopped) return;
- res = rtw_read8(padapter, REG_LEDCFG2, &LedCfg); - if (res) - return; - - rtw_write8(padapter, REG_LEDCFG2, (LedCfg & 0xf0) | BIT(5) | BIT(6)); /* SW control led0 on. */ + rtw_write8(padapter, REG_LEDCFG2, BIT(5)); /* SW control led0 on. */ pLed->bLedOn = true; }
static void SwLedOff(struct adapter *padapter, struct led_priv *pLed) { - u8 LedCfg; - int res; - if (padapter->bDriverStopped) goto exit;
- res = rtw_read8(padapter, REG_LEDCFG2, &LedCfg);/* 0x4E */ - if (res) - goto exit; - - LedCfg &= 0x90; /* Set to software control. */ - rtw_write8(padapter, REG_LEDCFG2, (LedCfg | BIT(3))); - res = rtw_read8(padapter, REG_MAC_PINMUX_CFG, &LedCfg); - if (res) - goto exit; - - LedCfg &= 0xFE; - rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg); + rtw_write8(padapter, REG_LEDCFG2, BIT(5) | BIT(3)); exit: pLed->bLedOn = false; }