From: Konrad Dybcio konrad.dybcio@somainline.org
[ Upstream commit 5c554c2d67a8c6c43a1fb542cbc73c33ff04c344 ]
Sony Xperia Z1 and Z1 compact are almost identical, and that shows in their DTs. Commonize the repeating parts and modernize the DTs to use labels.
As a bonus, Z1C gains touchscreen support in this commit, as it was present on Z1 already.
Signed-off-by: Konrad Dybcio konrad.dybcio@somainline.org [bjorn: Rebased on top of Krzysztof's fixes] Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220415115633.575010-13-konrad.dybcio@somainline.... Signed-off-by: Sasha Levin sashal@kernel.org --- .../dts/qcom-msm8974-sony-xperia-amami.dts | 432 +--------------- .../dts/qcom-msm8974-sony-xperia-honami.dts | 479 +----------------- .../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 449 ++++++++++++++++ arch/arm/boot/dts/qcom-pm8941.dtsi | 2 +- 4 files changed, 456 insertions(+), 906 deletions(-) create mode 100644 arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts index 6545917dd489..68d5626bf491 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts @@ -1,435 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-msm8974-sony-xperia-rhine.dtsi"
/ { model = "Sony Xperia Z1 Compact"; compatible = "sony,xperia-amami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm-requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; };
-&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1300000>; - qcom,fast-charge-current-limit = <1300000>; - qcom,dc-current-limit = <1300000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; +&smbb { + qcom,fast-charge-safe-current = <1300000>; + qcom,fast-charge-current-limit = <1300000>; + qcom,dc-current-limit = <1300000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 313c755f590f..ea6a941d8f8c 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -1,484 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-msm8974-sony-xperia-rhine.dtsi"
/ { model = "Sony Xperia Z1"; compatible = "sony,xperia-honami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm-requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - i2c@f9924000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-x; - syna,sensor-type = <1>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - ts_int_pin: touch-int { - pin { - pins = "gpio61"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi new file mode 100644 index 000000000000..87ec3694add9 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -0,0 +1,449 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_pin_a>; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pm8941_wled { + status = "okay"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; + +&rpm_requests { + pm8841-regulators { + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + ts_int_pin: touch-int { + pin { + pins = "gpio61"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + + blsp1_uart2_pin_a: blsp1-uart2-pin-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + + drive-strength = <4>; + bias-disable; + }; + }; + + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index da00b8f5eecd..cdd2bdb77b32 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -131,7 +131,7 @@ pm8941_iadc: iadc@3600 { qcom,external-resistor-micro-ohms = <10000>; };
- coincell@2800 { + pm8941_coincell: coincell@2800 { compatible = "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled";