From: Josh Poimboeuf jpoimboe@redhat.com
commit 18ec54fdd6d18d92025af097cd042a75cf0ea24c upstream.
Spectre v1 isn't only about array bounds checks. It can affect any conditional checks. The kernel entry code interrupt, exception, and NMI handlers all have conditional swapgs checks. Those may be problematic in the context of Spectre v1, as kernel code can speculatively run with a user GS.
For example:
if (coming from user space) swapgs mov %gs:<percpu_offset>, %reg mov (%reg), %reg1
When coming from user space, the CPU can speculatively skip the swapgs, and then do a speculative percpu load using the user GS value. So the user can speculatively force a read of any kernel value. If a gadget exists which uses the percpu value as an address in another load/store, then the contents of the kernel value may become visible via an L1 side channel attack.
A similar attack exists when coming from kernel space. The CPU can speculatively do the swapgs, causing the user GS to get used for the rest of the speculative window.
The mitigation is similar to a traditional Spectre v1 mitigation, except:
a) index masking isn't possible; because the index (percpu offset) isn't user-controlled; and
b) an lfence is needed in both the "from user" swapgs path and the "from kernel" non-swapgs path (because of the two attacks described above).
The user entry swapgs paths already have SWITCH_TO_KERNEL_CR3, which has a CR3 write when PTI is enabled. Since CR3 writes are serializing, the lfences can be skipped in those cases.
On the other hand, the kernel entry swapgs paths don't depend on PTI.
To avoid unnecessary lfences for the user entry case, create two separate features for alternative patching:
X86_FEATURE_FENCE_SWAPGS_USER X86_FEATURE_FENCE_SWAPGS_KERNEL
Use these features in entry code to patch in lfences where needed.
The features aren't enabled yet, so there's no functional change.
Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Dave Hansen dave.hansen@intel.com [bwh: Backported to 4.4: - Assign the CPU feature bits from word 7 - Add FENCE_SWAPGS_KERNEL_ENTRY to NMI entry, since it does not use paranoid_entry - Include <asm/cpufeatures.h> in calling.h - Adjust context] Signed-off-by: Ben Hutchings ben@decadent.org.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/entry/calling.h | 19 +++++++++++++++++++ arch/x86/entry/entry_64.S | 21 +++++++++++++++++++-- arch/x86/include/asm/cpufeatures.h | 3 +++ 3 files changed, 41 insertions(+), 2 deletions(-)
--- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -1,3 +1,5 @@ +#include <asm/cpufeatures.h> + /*
x86 function call convention, 64-bit: @@ -199,6 +201,23 @@ For 32-bit we have the following convent .byte 0xf1 .endm
+/* + * Mitigate Spectre v1 for conditional swapgs code paths. + * + * FENCE_SWAPGS_USER_ENTRY is used in the user entry swapgs code path, to + * prevent a speculative swapgs when coming from kernel space. + * + * FENCE_SWAPGS_KERNEL_ENTRY is used in the kernel entry non-swapgs code path, + * to prevent the swapgs from getting speculatively skipped when coming from + * user space. + */ +.macro FENCE_SWAPGS_USER_ENTRY + ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_USER +.endm +.macro FENCE_SWAPGS_KERNEL_ENTRY + ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_KERNEL +.endm + #else /* CONFIG_X86_64 */
/* --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -551,6 +551,7 @@ END(irq_entries_start) * tracking that we're in kernel mode. */ SWAPGS + FENCE_SWAPGS_USER_ENTRY SWITCH_KERNEL_CR3
/* @@ -566,8 +567,10 @@ END(irq_entries_start) #ifdef CONFIG_CONTEXT_TRACKING call enter_from_user_mode #endif - + jmpq 2f 1: + FENCE_SWAPGS_KERNEL_ENTRY +2: /* * Save previous stack pointer, optionally switch to interrupt stack. * irq_count is used to check if a CPU is already on an interrupt stack @@ -1077,6 +1080,13 @@ ENTRY(paranoid_entry) movq %rax, %cr3 2: #endif + /* + * The above doesn't do an unconditional CR3 write, even in the PTI + * case. So do an lfence to prevent GS speculation, regardless of + * whether PTI is enabled. + */ + FENCE_SWAPGS_KERNEL_ENTRY + ret END(paranoid_entry)
@@ -1138,6 +1148,7 @@ ENTRY(error_entry) * from user mode due to an IRET fault. */ SWAPGS + FENCE_SWAPGS_USER_ENTRY
.Lerror_entry_from_usermode_after_swapgs: /* @@ -1151,6 +1162,8 @@ ENTRY(error_entry) #endif ret
+.Lerror_entry_done_lfence: + FENCE_SWAPGS_KERNEL_ENTRY .Lerror_entry_done: TRACE_IRQS_OFF ret @@ -1169,7 +1182,7 @@ ENTRY(error_entry) cmpq %rax, RIP+8(%rsp) je .Lbstep_iret cmpq $gs_change, RIP+8(%rsp) - jne .Lerror_entry_done + jne .Lerror_entry_done_lfence
/* * hack: gs_change can fail with user gsbase. If this happens, fix up @@ -1177,6 +1190,7 @@ ENTRY(error_entry) * gs_change's error handler with kernel gsbase. */ SWAPGS + FENCE_SWAPGS_USER_ENTRY jmp .Lerror_entry_done
.Lbstep_iret: @@ -1190,6 +1204,7 @@ ENTRY(error_entry) * Switch to kernel gsbase: */ SWAPGS + FENCE_SWAPGS_USER_ENTRY
/* * Pretend that the exception came from user mode: set up pt_regs @@ -1286,6 +1301,7 @@ ENTRY(nmi) * to switch CR3 here. */ cld + FENCE_SWAPGS_USER_ENTRY movq %rsp, %rdx movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp pushq 5*8(%rdx) /* pt_regs->ss */ @@ -1574,6 +1590,7 @@ end_repeat_nmi: movq %rax, %cr3 2: #endif + FENCE_SWAPGS_KERNEL_ENTRY
/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ call do_nmi --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -192,6 +192,9 @@ #define X86_FEATURE_HW_PSTATE ( 7*32+ 8) /* AMD HW-PState */ #define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
+#define X86_FEATURE_FENCE_SWAPGS_USER ( 7*32+10) /* "" LFENCE in user entry SWAPGS path */ +#define X86_FEATURE_FENCE_SWAPGS_KERNEL ( 7*32+11) /* "" LFENCE in kernel entry SWAPGS path */ + #define X86_FEATURE_RETPOLINE ( 7*32+12) /* "" Generic Retpoline mitigation for Spectre variant 2 */ #define X86_FEATURE_RETPOLINE_AMD ( 7*32+13) /* "" AMD Retpoline mitigation for Spectre variant 2 */