commit eadb2f47a3ced5c64b23b90fd2a3463f63726066 upstream.
KGDB and KDB allow read and write access to kernel memory, and thus should be restricted during lockdown. An attacker with access to a serial port (for example, via a hypervisor console, which some cloud vendors provide over the network) could trigger the debugger so it is important that the debugger respect the lockdown mode when/if it is triggered.
Fix this by integrating lockdown into kdb's existing permissions mechanism. Unfortunately kgdb does not have any permissions mechanism (although it certainly could be added later) so, for now, kgdb is simply and brutally disabled by immediately exiting the gdb stub without taking any action.
For lockdowns established early in the boot (e.g. the normal case) then this should be fine but on systems where kgdb has set breakpoints before the lockdown is enacted than "bad things" will happen.
CVE: CVE-2022-21499 Co-developed-by: Stephen Brennan stephen.s.brennan@oracle.com Signed-off-by: Stephen Brennan stephen.s.brennan@oracle.com Reviewed-by: Douglas Anderson dianders@chromium.org Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org ---
Notes: Original patch did not backport cleanly. This backport is fixed up, compile tested (on arm64) and side-by-side compared against the original.
include/linux/security.h | 2 ++ kernel/debug/debug_core.c | 24 ++++++++++++++ kernel/debug/kdb/kdb_main.c | 62 +++++++++++++++++++++++++++++++++++-- security/security.c | 2 ++ 4 files changed, 87 insertions(+), 3 deletions(-)
diff --git a/include/linux/security.h b/include/linux/security.h index 35355429648e..330029ef7e89 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -121,10 +121,12 @@ enum lockdown_reason { LOCKDOWN_DEBUGFS, LOCKDOWN_XMON_WR, LOCKDOWN_BPF_WRITE_USER, + LOCKDOWN_DBG_WRITE_KERNEL, LOCKDOWN_INTEGRITY_MAX, LOCKDOWN_KCORE, LOCKDOWN_KPROBES, LOCKDOWN_BPF_READ, + LOCKDOWN_DBG_READ_KERNEL, LOCKDOWN_PERF, LOCKDOWN_TRACEFS, LOCKDOWN_XMON_RW, diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c index 8661eb2b1771..0f31b22abe8d 100644 --- a/kernel/debug/debug_core.c +++ b/kernel/debug/debug_core.c @@ -56,6 +56,7 @@ #include <linux/vmacache.h> #include <linux/rcupdate.h> #include <linux/irq.h> +#include <linux/security.h>
#include <asm/cacheflush.h> #include <asm/byteorder.h> @@ -756,6 +757,29 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs, continue; kgdb_connected = 0; } else { + /* + * This is a brutal way to interfere with the debugger + * and prevent gdb being used to poke at kernel memory. + * This could cause trouble if lockdown is applied when + * there is already an active gdb session. For now the + * answer is simply "don't do that". Typically lockdown + * *will* be applied before the debug core gets started + * so only developers using kgdb for fairly advanced + * early kernel debug can be biten by this. Hopefully + * they are sophisticated enough to take care of + * themselves, especially with help from the lockdown + * message printed on the console! + */ + if (security_locked_down(LOCKDOWN_DBG_WRITE_KERNEL)) { + if (IS_ENABLED(CONFIG_KGDB_KDB)) { + /* Switch back to kdb if possible... */ + dbg_kdb_mode = 1; + continue; + } else { + /* ... otherwise just bail */ + break; + } + } error = gdb_serial_stub(ks); }
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 930ac1b25ec7..4e09fab52faf 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -45,6 +45,7 @@ #include <linux/proc_fs.h> #include <linux/uaccess.h> #include <linux/slab.h> +#include <linux/security.h> #include "kdb_private.h"
#undef MODULE_PARAM_PREFIX @@ -197,10 +198,62 @@ struct task_struct *kdb_curr_task(int cpu) }
/* - * Check whether the flags of the current command and the permissions - * of the kdb console has allow a command to be run. + * Update the permissions flags (kdb_cmd_enabled) to match the + * current lockdown state. + * + * Within this function the calls to security_locked_down() are "lazy". We + * avoid calling them if the current value of kdb_cmd_enabled already excludes + * flags that might be subject to lockdown. Additionally we deliberately check + * the lockdown flags independently (even though read lockdown implies write + * lockdown) since that results in both simpler code and clearer messages to + * the user on first-time debugger entry. + * + * The permission masks during a read+write lockdown permits the following + * flags: INSPECT, SIGNAL, REBOOT (and ALWAYS_SAFE). + * + * The INSPECT commands are not blocked during lockdown because they are + * not arbitrary memory reads. INSPECT covers the backtrace family (sometimes + * forcing them to have no arguments) and lsmod. These commands do expose + * some kernel state but do not allow the developer seated at the console to + * choose what state is reported. SIGNAL and REBOOT should not be controversial, + * given these are allowed for root during lockdown already. + */ +static void kdb_check_for_lockdown(void) +{ + const int write_flags = KDB_ENABLE_MEM_WRITE | + KDB_ENABLE_REG_WRITE | + KDB_ENABLE_FLOW_CTRL; + const int read_flags = KDB_ENABLE_MEM_READ | + KDB_ENABLE_REG_READ; + + bool need_to_lockdown_write = false; + bool need_to_lockdown_read = false; + + if (kdb_cmd_enabled & (KDB_ENABLE_ALL | write_flags)) + need_to_lockdown_write = + security_locked_down(LOCKDOWN_DBG_WRITE_KERNEL); + + if (kdb_cmd_enabled & (KDB_ENABLE_ALL | read_flags)) + need_to_lockdown_read = + security_locked_down(LOCKDOWN_DBG_READ_KERNEL); + + /* De-compose KDB_ENABLE_ALL if required */ + if (need_to_lockdown_write || need_to_lockdown_read) + if (kdb_cmd_enabled & KDB_ENABLE_ALL) + kdb_cmd_enabled = KDB_ENABLE_MASK & ~KDB_ENABLE_ALL; + + if (need_to_lockdown_write) + kdb_cmd_enabled &= ~write_flags; + + if (need_to_lockdown_read) + kdb_cmd_enabled &= ~read_flags; +} + +/* + * Check whether the flags of the current command, the permissions of the kdb + * console and the lockdown state allow a command to be run. */ -static inline bool kdb_check_flags(kdb_cmdflags_t flags, int permissions, +static bool kdb_check_flags(kdb_cmdflags_t flags, int permissions, bool no_args) { /* permissions comes from userspace so needs massaging slightly */ @@ -1194,6 +1247,9 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, kdb_curr_task(raw_smp_processor_id());
KDB_DEBUG_STATE("kdb_local 1", reason); + + kdb_check_for_lockdown(); + kdb_go_count = 0; if (reason == KDB_REASON_DEBUG) { /* special case below */ diff --git a/security/security.c b/security/security.c index d9d42d64f89f..360706cdabab 100644 --- a/security/security.c +++ b/security/security.c @@ -59,10 +59,12 @@ const char *const lockdown_reasons[LOCKDOWN_CONFIDENTIALITY_MAX+1] = { [LOCKDOWN_DEBUGFS] = "debugfs access", [LOCKDOWN_XMON_WR] = "xmon write access", [LOCKDOWN_BPF_WRITE_USER] = "use of bpf to write user RAM", + [LOCKDOWN_DBG_WRITE_KERNEL] = "use of kgdb/kdb to write kernel RAM", [LOCKDOWN_INTEGRITY_MAX] = "integrity", [LOCKDOWN_KCORE] = "/proc/kcore access", [LOCKDOWN_KPROBES] = "use of kprobes", [LOCKDOWN_BPF_READ] = "use of bpf to read kernel RAM", + [LOCKDOWN_DBG_READ_KERNEL] = "use of kgdb/kdb to read kernel RAM", [LOCKDOWN_PERF] = "unsafe use of perf", [LOCKDOWN_TRACEFS] = "use of tracefs", [LOCKDOWN_XMON_RW] = "xmon read and write access",
base-commit: c204ee3350ebbc4e2ab108cbce7afc0cac1c407d -- 2.35.1