6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sai Kumar Cholleti skmr537@gmail.com
commit 72cef64180de04a7b055b4773c138d78f4ebdb77 upstream.
Setting GPIO direction = high, sometimes results in GPIO value = 0.
If a GPIO is pulled high, the following construction results in the value being 0 when the desired value is 1:
$ echo "high" > /sys/class/gpio/gpio336/direction $ cat /sys/class/gpio/gpio336/value 0
Before the GPIO direction is changed from an input to an output, exar_set_value() is called with value = 1, but since the GPIO is an input when exar_set_value() is called, _regmap_update_bits() reads a 1 due to an external pull-up. regmap_set_bits() sets force_write = false, so the value (1) is not written. When the direction is then changed, the GPIO becomes an output with the value of 0 (the hardware default).
regmap_write_bits() sets force_write = true, so the value is always written by exar_set_value() and an external pull-up doesn't affect the outcome of setting direction = high.
The same can happen when a GPIO is pulled low, but the scenario is a little more complicated.
$ echo high > /sys/class/gpio/gpio351/direction $ cat /sys/class/gpio/gpio351/value 1
$ echo in > /sys/class/gpio/gpio351/direction $ cat /sys/class/gpio/gpio351/value 0
$ echo low > /sys/class/gpio/gpio351/direction $ cat /sys/class/gpio/gpio351/value 1
Fixes: 36fb7218e878 ("gpio: exar: switch to using regmap") Co-developed-by: Matthew McClain mmcclain@noprivs.com Signed-off-by: Matthew McClain mmcclain@noprivs.com Signed-off-by: Sai Kumar Cholleti skmr537@gmail.com Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20241105071523.2372032-1-skmr537@gmail.com Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpio/gpio-exar.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/gpio/gpio-exar.c +++ b/drivers/gpio/gpio-exar.c @@ -99,11 +99,13 @@ static void exar_set_value(struct gpio_c struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip); unsigned int addr = exar_offset_to_lvl_addr(exar_gpio, offset); unsigned int bit = exar_offset_to_bit(exar_gpio, offset); + unsigned int bit_value = value ? BIT(bit) : 0;
- if (value) - regmap_set_bits(exar_gpio->regmap, addr, BIT(bit)); - else - regmap_clear_bits(exar_gpio->regmap, addr, BIT(bit)); + /* + * regmap_write_bits() forces value to be written when an external + * pull up/down might otherwise indicate value was already set. + */ + regmap_write_bits(exar_gpio->regmap, addr, BIT(bit), bit_value); }
static int exar_direction_output(struct gpio_chip *chip, unsigned int offset,