From: Dmitry Baryshkov dmitry.baryshkov@linaro.org
[ Upstream commit 903238a33c116edf5f64f7a3fd246e6169cccfa6 ]
On msm8939 last (hwid=10) sensor was added in the hw revision 3.0. Calibration data for it was placed outside of the main calibration data blob, so it is not accessible by the current blob-parsing code.
Moreover data for the sensor's p2 is not contiguous in the fuses. This makes it hard to use nvmem_cell API to parse calibration data in a generic way.
Since the sensor doesn't seem to be actually used by the existing hardware, disable the sensor for now.
Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Cc: Bryan O'Donoghue bryan.odonoghue@linaro.org Cc: Shawn Guo shawn.guo@linaro.org Acked-by: Shawn Guo shawn.guo@linaro.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Link: https://lore.kernel.org/r/20230101194034.831222-9-dmitry.baryshkov@linaro.or... Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/qcom/tsens-v0_1.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c index af2659037f010..3158f13c54305 100644 --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -285,7 +285,7 @@ static int calibrate_8939(struct tsens_priv *priv) u32 p1[10], p2[10]; int mode = 0; u32 *qfprom_cdata; - u32 cdata[6]; + u32 cdata[4];
qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); if (IS_ERR(qfprom_cdata)) @@ -296,8 +296,6 @@ static int calibrate_8939(struct tsens_priv *priv) cdata[1] = qfprom_cdata[13]; cdata[2] = qfprom_cdata[0]; cdata[3] = qfprom_cdata[1]; - cdata[4] = qfprom_cdata[22]; - cdata[5] = qfprom_cdata[21];
mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT; dev_dbg(priv->dev, "calibration mode is %d\n", mode); @@ -314,8 +312,6 @@ static int calibrate_8939(struct tsens_priv *priv) p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT; p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT; p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT; - p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4; - p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5; for (i = 0; i < priv->num_sensors; i++) p2[i] = (base1 + p2[i]) << 2; fallthrough; @@ -331,7 +327,6 @@ static int calibrate_8939(struct tsens_priv *priv) p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT; p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT; p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT; - p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT; for (i = 0; i < priv->num_sensors; i++) p1[i] = ((base0) + p1[i]) << 2; break; @@ -544,7 +539,7 @@ static int __init init_8939(struct tsens_priv *priv) { priv->sensor[6].slope = 2833; priv->sensor[7].slope = 2838; priv->sensor[8].slope = 2840; - priv->sensor[9].slope = 2852; + /* priv->sensor[9].slope = 2852; */
return init_common(priv); } @@ -620,9 +615,9 @@ static const struct tsens_ops ops_8939 = { };
struct tsens_plat_data data_8939 = { - .num_sensors = 10, + .num_sensors = 9, .ops = &ops_8939, - .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, 10 }, + .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, /* 10 */ },
.feat = &tsens_v0_1_feat, .fields = tsens_v0_1_regfields,