[PATCH] arm64: dts: rockchip: configure pad driver strength for orangepi r1 plus lts

The default strength is not enough to provide stable connection under 3.3v LDO voltage.

Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")

Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen cnsztl@gmail.com --- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 5d7d567283e5..4237f2ee8fee 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -26,9 +26,11 @@ yt8531c: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>;

+ motorcomm,auto-sleep-disabled; motorcomm,clk-out-frequency-hz = <125000000>; motorcomm,keep-pll-enabled; - motorcomm,auto-sleep-disabled; + motorcomm,rx-clk-drv-microamp = <5020>; + motorcomm,rx-data-drv-microamp = <5020>;

pinctrl-0 = <&eth_phy_reset_pin>; pinctrl-names = "default";