Hi,
On Wed, Jun 17, 2020 at 12:23:05PM +0200, Krzysztof Kozlowski wrote:
The driver requires interrupts (fails probe if it is not provided) so document this requirement in bindings.
Fixes: 4aeae9cb0dad ("power_supply: Add support for TI BQ25890 charger chip") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzk@kernel.org
Thanks, queued.
-- Sebastian
Documentation/devicetree/bindings/power/supply/bq25890.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt index 51ecc756521f..3b4c69a7fa70 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt @@ -10,6 +10,7 @@ Required properties: * "ti,bq25895" * "ti,bq25896"
- reg: integer, i2c address of the device.
+- interrupts: interrupt line;
- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
- ti,charge-current: integer, maximum charging current (in uA);
- ti,termination-current: integer, charge will be terminated when current in
@@ -39,6 +40,9 @@ bq25890 { compatible = "ti,bq25890"; reg = <0x6a>;
- interrupt-parent = <&gpio1>;
- interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
- ti,battery-regulation-voltage = <4200000>; ti,charge-current = <1000000>; ti,termination-current = <50000>;
-- 2.17.1