Hi,
On Mon, Sep 13, 2021 at 6:51 AM Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
From: Douglas Anderson dianders@chromium.org
[ Upstream commit a70e558c151043ce46a5e5999f4310e0b3551f57 ]
This is really just a revert of commit 58074b08c04a ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC"), resolving conflicts.
The old code failed to read the EDID properly in a very important case: before the bridge's pre_enable() was called. The way things need to work:
- Read the EDID.
- Based on the EDID, decide on video settings and pixel clock.
- Enable the bridge w/ the desired settings.
The way things were working:
- Try to read the EDID but fail; fall back to hardcoded values.
- Based on hardcoded values, decide on video settings and pixel clock.
- Enable the bridge w/ the desired settings.
- Try again to read the EDID, it works now!
- Realize that the hardcoded settings weren't quite right.
- Disable / reenable the bridge w/ the right settings.
The reasons for the failures were twofold: a) Since we never ran the bridge chip's pre-enable then we never set the bit to ignore HPD. This meant the bridge chip didn't even _try_ to go out on the bus and communicate with the panel. b) Even if we fixed things to ignore HPD, the EDID still wouldn't read if the panel wasn't on.
Instead of reverting the code, we could fix it to set the HPD bit and also power on the panel. However, it also works nicely to just let the panel code read the EDID. Now that we've split the driver up we can expose the DDC AUX channel bus to the panel node. The panel can take charge of reading the EDID.
NOTE: in order for things to work, anyone that needs to read the EDID will need to instantiate their panel using the new DP AUX bus (AKA by listing their panel under the "aux-bus" node of the bridge chip in the device tree).
In the future if we want to use the bridge chip to provide a full external DP port (which won't have a panel) then we will have to conditinally add EDID reading back in.
Suggested-by: Andrzej Hajda a.hajda@samsung.com Signed-off-by: Douglas Anderson dianders@chromium.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.9.I9330684c... Signed-off-by: Sasha Levin sashal@kernel.org
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 22 ---------------------- 1 file changed, 22 deletions(-)
I guess it's not a huge deal, but I did respond to Sasha and request that this patch be dropped from the stable queue unless the whole big pile of patches was being backported. See:
https://lore.kernel.org/lkml/CAD=FV=U2dGjeEzp+K1vnLTj8oPJ-GKBTTKz2XQ1OZ7QF_s...
I said:
I would suggest against backporting this one unless you're going to backport the whole pile of DP AUX bus patches, which probably doesn't make sense for stable. Even though the old EDID reading was broken for the first read, it still worked for later reads. ...and the first read
. didn't crash or anything--it just timed out.
-Doug