From: Anson Huang Anson.Huang@nxp.com
[ Upstream commit 3479b2843c78ffb60247f522226ba68f93aee355 ]
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario.
Fixes: 96a9169cf621 ("ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0") Signed-off-by: Anson Huang Anson.Huang@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/imx6sll-evk.dts | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index 3e1d32fdf4b85..5ace9e6acf85c 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -265,10 +265,6 @@ status = "okay"; };
-®_3p0 { - vin-supply = <&sw2_reg>; -}; - &snvs_poweroff { status = "okay"; };