From: Daniel Drake drake@endlessm.com
[ Upstream commit 604dc9170f2435d27da5039a3efd757dceadc684 ]
native_calibrate_tsc() had a data mapping Intel CPU families and crystal clock speed, but hardcoded tables are not ideal, and this approach was already problematic at least in the Skylake X case, as seen in commit:
b51120309348 ("x86/tsc: Fix erroneous TSC rate on Skylake Xeon")
By examining CPUID data from http://instlatx64.atw.hu/ and units in the lab, we have found that 3 different scenarios need to be dealt with, and we can eliminate most of the hardcoded data using an approach a little more advanced than before:
1. ApolloLake, GeminiLake, CannonLake (and presumably all new chipsets from this point) report the crystal frequency directly via CPUID.0x15. That's definitive data that we can rely upon.
2. Skylake, Kabylake and all variants of those two chipsets report a crystal frequency of zero, however we can calculate the crystal clock speed by condidering data from CPUID.0x16.
This method correctly distinguishes between the two crystal clock frequencies present on different Skylake X variants that caused headaches before.
As the calculations do not quite match the previously-hardcoded values in some cases (e.g. 23913043Hz instead of 24MHz), TSC refinement is enabled on all platforms where we had to calculate the crystal frequency in this way.
3. Denverton (GOLDMONT_X) reports a crystal frequency of zero and does not support CPUID.0x16, so we leave this entry hardcoded.
Suggested-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Daniel Drake drake@endlessm.com Reviewed-by: Thomas Gleixner tglx@linutronix.de Cc: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: H. Peter Anvin hpa@zytor.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: len.brown@intel.com Cc: linux@endlessm.com Cc: rafael.j.wysocki@intel.com Link: http://lkml.kernel.org/r/20190509055417.13152-1-drake@endlessm.com Link: https://lkml.kernel.org/r/20190419083533.32388-1-drake@endlessm.com Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/tsc.c | 47 +++++++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 20 deletions(-)
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 3fae23834069..12e5af305abd 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -629,31 +629,38 @@ unsigned long native_calibrate_tsc(void)
crystal_khz = ecx_hz / 1000;
- if (crystal_khz == 0) { - switch (boot_cpu_data.x86_model) { - case INTEL_FAM6_SKYLAKE_MOBILE: - case INTEL_FAM6_SKYLAKE_DESKTOP: - case INTEL_FAM6_KABYLAKE_MOBILE: - case INTEL_FAM6_KABYLAKE_DESKTOP: - crystal_khz = 24000; /* 24.0 MHz */ - break; - case INTEL_FAM6_ATOM_GOLDMONT_X: - crystal_khz = 25000; /* 25.0 MHz */ - break; - case INTEL_FAM6_ATOM_GOLDMONT: - crystal_khz = 19200; /* 19.2 MHz */ - break; - } - } + /* + * Denverton SoCs don't report crystal clock, and also don't support + * CPUID.0x16 for the calculation below, so hardcode the 25MHz crystal + * clock. + */ + if (crystal_khz == 0 && + boot_cpu_data.x86_model == INTEL_FAM6_ATOM_GOLDMONT_X) + crystal_khz = 25000;
- if (crystal_khz == 0) - return 0; /* - * TSC frequency determined by CPUID is a "hardware reported" + * TSC frequency reported directly by CPUID is a "hardware reported" * frequency and is the most accurate one so far we have. This * is considered a known frequency. */ - setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); + if (crystal_khz != 0) + setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); + + /* + * Some Intel SoCs like Skylake and Kabylake don't report the crystal + * clock, but we can easily calculate it to a high degree of accuracy + * by considering the crystal ratio and the CPU speed. + */ + if (crystal_khz == 0 && boot_cpu_data.cpuid_level >= 0x16) { + unsigned int eax_base_mhz, ebx, ecx, edx; + + cpuid(0x16, &eax_base_mhz, &ebx, &ecx, &edx); + crystal_khz = eax_base_mhz * 1000 * + eax_denominator / ebx_numerator; + } + + if (crystal_khz == 0) + return 0;
/* * For Atom SoCs TSC is the only reliable clocksource.