From: Shyam Sundar S K Shyam-sundar.S-k@amd.com
[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]
For each rate change command submission, the FW has to do a phy power off sequence internally. For this to happen correctly, the PLL re-initialization control setting has to be turned off before sending mailbox commands and re-enabled once the command submission is complete.
Without the PLL control setting, the link up takes longer time in a fixed phy configuration.
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support") Co-developed-by: Sudheesh Mavila sudheesh.mavila@amd.com Signed-off-by: Sudheesh Mavila sudheesh.mavila@amd.com Signed-off-by: Shyam Sundar S K Shyam-sundar.S-k@amd.com Acked-by: Tom Lendacky thomas.lendacky@amd.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 8 ++++++++ drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 20 +++++++++++++++++++- 2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h index b2cd3bdba9f89..533b8519ec352 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h @@ -1331,6 +1331,10 @@ #define MDIO_VEND2_PMA_CDR_CONTROL 0x8056 #endif
+#ifndef MDIO_VEND2_PMA_MISC_CTRL0 +#define MDIO_VEND2_PMA_MISC_CTRL0 0x8090 +#endif + #ifndef MDIO_CTRL1_SPEED1G #define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100) #endif @@ -1389,6 +1393,10 @@ #define XGBE_PMA_RX_RST_0_RESET_ON 0x10 #define XGBE_PMA_RX_RST_0_RESET_OFF 0x00
+#define XGBE_PMA_PLL_CTRL_MASK BIT(15) +#define XGBE_PMA_PLL_CTRL_ENABLE BIT(15) +#define XGBE_PMA_PLL_CTRL_DISABLE 0x0000 + /* Bit setting and getting macros * The get macro will extract the current bit field value from within * the variable diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c index d6f6afb67bcc6..0b325ae875b52 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c @@ -1972,12 +1972,26 @@ static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata) } }
+static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable) +{ + XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0, + XGBE_PMA_PLL_CTRL_MASK, + enable ? XGBE_PMA_PLL_CTRL_ENABLE + : XGBE_PMA_PLL_CTRL_DISABLE); + + /* Wait for command to complete */ + usleep_range(100, 200); +} + static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, unsigned int cmd, unsigned int sub_cmd) { unsigned int s0 = 0; unsigned int wait;
+ /* Disable PLL re-initialization during FW command processing */ + xgbe_phy_pll_ctrl(pdata, false); + /* Log if a previous command did not complete */ if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) { netif_dbg(pdata, link, pdata->netdev, @@ -1998,7 +2012,7 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, wait = XGBE_RATECHANGE_COUNT; while (wait--) { if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) - return; + goto reenable_pll;
usleep_range(1000, 2000); } @@ -2008,6 +2022,10 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
/* Reset on error */ xgbe_phy_rx_reset(pdata); + +reenable_pll: + /* Enable PLL re-initialization */ + xgbe_phy_pll_ctrl(pdata, true); }
static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)