From: Daniel Borkmann daniel@iogearbox.net
commit f2d67fec0b43edce8c416101cdc52e71145b5fef upstream.
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes:
0: (b7) r0 = 808464432 1: (7f) r0 >>= r0 2: (14) w0 -= 808464432 3: (07) r0 += 808464432 4: (b7) r1 = 808464432 5: (de) if w1 s<= w0 goto pc+0 R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020;0x10000001f)) R1_w=invP808464432 R10=fp0 6: (07) r0 += -2144337872 7: (14) w0 -= -1607454672 8: (25) if r0 > 0x30303030 goto pc+0 R0_w=invP(id=0,umin_value=271581184,umax_value=271581311,var_off=(0x10300000;0x7f)) R1_w=invP808464432 R10=fp0 9: (76) if w0 s>= 0x303030 goto pc+2 12: (95) exit
from 8 to 9: safe
from 5 to 6: R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020;0x10000001f)) R1_w=invP808464432 R10=fp0 6: (07) r0 += -2144337872 7: (14) w0 -= -1607454672 8: (25) if r0 > 0x30303030 goto pc+0 R0_w=invP(id=0,umin_value=271581184,umax_value=271581311,var_off=(0x10300000;0x7f)) R1_w=invP808464432 R10=fp0 9: safe
from 8 to 9: safe verification time 589 usec stack depth 0 processed 17 insns (limit 1000000) [...]
The underlying program was xlated as follows:
# bpftool p d x i 9 0: (b7) r0 = 808464432 1: (7f) r0 >>= r0 2: (14) w0 -= 808464432 3: (07) r0 += 808464432 4: (b7) r1 = 808464432 5: (de) if w1 s<= w0 goto pc+0 6: (07) r0 += -2144337872 7: (14) w0 -= -1607454672 8: (25) if r0 > 0x30303030 goto pc+0 9: (76) if w0 s>= 0x303030 goto pc+2 10: (05) goto pc-1 11: (05) goto pc-1 12: (95) exit
The verifier rewrote original instructions it recognized as dead code with 'goto pc-1', but reality differs from verifier simulation in that we're actually able to trigger a hang due to hitting the 'goto pc-1' instructions.
Taking different examples to make the issue more obvious: in this example we're probing bounds on a completely unknown scalar variable in r1:
[...] 5: R0_w=inv1 R1_w=inv(id=0) R10=fp0 5: (18) r2 = 0x4000000000 7: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R10=fp0 7: (18) r3 = 0x2000000000 9: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R10=fp0 9: (18) r4 = 0x400 11: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R10=fp0 11: (18) r5 = 0x200 13: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0 13: (2d) if r1 > r2 goto pc+4 R0_w=inv1 R1_w=inv(id=0,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0 14: R0_w=inv1 R1_w=inv(id=0,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0 14: (ad) if r1 < r3 goto pc+3 R0_w=inv1 R1_w=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0 15: R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0 15: (2e) if w1 > w4 goto pc+2 R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0 16: R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0 16: (ae) if w1 < w5 goto pc+1 R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0 [...]
We're first probing lower/upper bounds via jmp64, later we do a similar check via jmp32 and examine the resulting var_off there. After fall-through in insn 14, we get the following bounded r1 with 0x7fffffffff unknown marked bits in the variable section.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000:
max: 0b100000000000000000000000000000000000000 / 0x4000000000 var: 0b111111111111111111111111111111111111111 / 0x7fffffffff min: 0b010000000000000000000000000000000000000 / 0x2000000000
Now, in insn 15 and 16, we perform a similar probe with lower/upper bounds in jmp32.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000 and w1 <= 0x400 and w1 >= 0x200:
max: 0b100000000000000000000000000000000000000 / 0x4000000000 var: 0b111111100000000000000000000000000000000 / 0x7f00000000 min: 0b010000000000000000000000000000000000000 / 0x2000000000
The lower/upper bounds haven't changed since they have high bits set in u64 space and the jmp32 tests can only refine bounds in the low bits.
However, for the var part the expectation would have been 0x7f000007ff or something less precise up to 0x7fffffffff. A outcome of 0x7f00000000 is not correct since it would contradict the earlier probed bounds where we know that the result should have been in [0x200,0x400] in u32 space. Therefore, tests with such info will lead to wrong verifier assumptions later on like falsely predicting conditional jumps to be always taken, etc.
The issue here is that __reg_bound_offset32()'s implementation from commit 581738a681b6 ("bpf: Provide better register bounds after jmp32 instructions") makes an incorrect range assumption:
static void __reg_bound_offset32(struct bpf_reg_state *reg) { u64 mask = 0xffffFFFF; struct tnum range = tnum_range(reg->umin_value & mask, reg->umax_value & mask); struct tnum lo32 = tnum_cast(reg->var_off, 4); struct tnum hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32);
reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range)); }
In the above walk-through example, __reg_bound_offset32() as-is chose a range after masking with 0xffffffff of [0x0,0x0] since umin:0x2000000000 and umax:0x4000000000 and therefore the lo32 part was clamped to 0x0 as well. However, in the umin:0x2000000000 and umax:0x4000000000 range above we'd end up with an actual possible interval of [0x0,0xffffffff] for u32 space instead.
In case of the original reproducer, the situation looked as follows at insn 5 for r0:
[...] 5: R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x0; 0x1ffffffff)) R1_w=invP808464432 R10=fp0 0x30303030 0x13030302f 5: (de) if w1 s<= w0 goto pc+0 R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020; 0x10000001f)) R1_w=invP808464432 R10=fp0 0x30303030 0x13030302f [...]
After the fall-through, we similarly forced the var_off result into the wrong range [0x30303030,0x3030302f] suggesting later on that fixed bits must only be of 0x30303020 with 0x10000001f unknowns whereas such assumption can only be made when both bounds in hi32 range match.
Originally, I was thinking to fix this by moving reg into a temp reg and use proper coerce_reg_to_size() helper on the temp reg where we can then based on that define the range tnum for later intersection:
static void __reg_bound_offset32(struct bpf_reg_state *reg) { struct bpf_reg_state tmp = *reg; struct tnum lo32, hi32, range;
coerce_reg_to_size(&tmp, 4); range = tnum_range(tmp.umin_value, tmp.umax_value); lo32 = tnum_cast(reg->var_off, 4); hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32); reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range)); }
In the case of the concrete example, this gives us a more conservative unknown section. Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000 and w1 <= 0x400 and w1 >= 0x200:
max: 0b100000000000000000000000000000000000000 / 0x4000000000 var: 0b111111111111111111111111111111111111111 / 0x7fffffffff min: 0b010000000000000000000000000000000000000 / 0x2000000000
However, above new __reg_bound_offset32() has no effect on refining the knowledge of the register contents. Meaning, if the bounds in hi32 range mismatch we'll get the identity function given the range reg spans [0x0,0xffffffff] and we cast var_off into lo32 only to later on binary or it again with the hi32.
Likewise, if the bounds in hi32 range match, then we mask both bounds with 0xffffffff, use the resulting umin/umax for the range to later intersect the lo32 with it. However, _prior_ called __reg_bound_offset() did already such intersection on the full reg and we therefore would only repeat the same operation on the lo32 part twice.
Given this has no effect and the original commit had false assumptions, this patch reverts the code entirely which is also more straight forward for stable trees: apparently 581738a681b6 got auto-selected by Sasha's ML system and misclassified as a fix, so it got sucked into v5.4 where it should never have landed. A revert is low-risk also from a user PoV since it requires a recent kernel and llc to opt-into -mcpu=v3 BPF CPU to generate jmp32 instructions. A proper bounds refinement would need a significantly more complex approach which is currently being worked, but no stable material [0]. Hence revert is best option for stable. After the revert, the original reported program gets rejected as follows:
1: (7f) r0 >>= r0 2: (14) w0 -= 808464432 3: (07) r0 += 808464432 4: (b7) r1 = 808464432 5: (de) if w1 s<= w0 goto pc+0 R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x0; 0x1ffffffff)) R1_w=invP808464432 R10=fp0 6: (07) r0 += -2144337872 7: (14) w0 -= -1607454672 8: (25) if r0 > 0x30303030 goto pc+0 R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x3fffffff)) R1_w=invP808464432 R10=fp0 9: (76) if w0 s>= 0x303030 goto pc+2 R0=invP(id=0,umax_value=3158063,var_off=(0x0; 0x3fffff)) R1=invP808464432 R10=fp0 10: (30) r0 = *(u8 *)skb[808464432] BPF_LD_[ABS|IND] uses reserved fields processed 11 insns (limit 1000000) [...]
[0] https://lore.kernel.org/bpf/158507130343.15666.8018068546764556975.stgit@joh...
Fixes: 581738a681b6 ("bpf: Provide better register bounds after jmp32 instructions") Reported-by: Anatoly Trosinenko anatoly.trosinenko@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Link: https://lore.kernel.org/bpf/20200330160324.15259-2-daniel@iogearbox.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- kernel/bpf/verifier.c | 19 ------------------- 1 file changed, 19 deletions(-)
--- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1034,17 +1034,6 @@ static void __reg_bound_offset(struct bp reg->umax_value)); }
-static void __reg_bound_offset32(struct bpf_reg_state *reg) -{ - u64 mask = 0xffffFFFF; - struct tnum range = tnum_range(reg->umin_value & mask, - reg->umax_value & mask); - struct tnum lo32 = tnum_cast(reg->var_off, 4); - struct tnum hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32); - - reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range)); -} - /* Reset the min/max bounds of a register */ static void __mark_reg_unbounded(struct bpf_reg_state *reg) { @@ -5717,10 +5706,6 @@ static void reg_set_min_max(struct bpf_r /* We might have learned some bits from the bounds. */ __reg_bound_offset(false_reg); __reg_bound_offset(true_reg); - if (is_jmp32) { - __reg_bound_offset32(false_reg); - __reg_bound_offset32(true_reg); - } /* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax. @@ -5830,10 +5815,6 @@ static void reg_set_min_max_inv(struct b /* We might have learned some bits from the bounds. */ __reg_bound_offset(false_reg); __reg_bound_offset(true_reg); - if (is_jmp32) { - __reg_bound_offset32(false_reg); - __reg_bound_offset32(true_reg); - } /* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax.