From: Nikita Yushchenko nikita.yoush@cogentembedded.com
[ Upstream commit 61305664a542f874283f74bf0b27ddb31f5045d7 ]
Reset GPIO is active low.
Currently driver uses gpiod_set_value(1) to clean reset, which depends on device tree to contain GPIO_ACTIVE_HIGH - that does not match reality.
This fixes driver to use _raw version of gpiod_set_value() to enforce active-low semantics despite of what's written in device tree. Allowing device tree to override that only opens possibility for errors and does not add any value.
Additionally, use _cansleep version to make things work with i2c-gpio and other sleeping gpio drivers.
Signed-off-by: Nikita Yushchenko nikita.yoush@cogentembedded.com Signed-off-by: Jonathan Cameron jic23@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/iio/adc/hi8435.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/hi8435.c b/drivers/iio/adc/hi8435.c index 52b2dcf1d942..fec696ec3fd1 100644 --- a/drivers/iio/adc/hi8435.c +++ b/drivers/iio/adc/hi8435.c @@ -453,13 +453,15 @@ static int hi8435_probe(struct spi_device *spi) priv->spi = spi;
reset_gpio = devm_gpiod_get(&spi->dev, NULL, GPIOD_OUT_LOW); - if (IS_ERR(reset_gpio)) { - /* chip s/w reset if h/w reset failed */ + if (!IS_ERR(reset_gpio)) { + /* need >=100ns low pulse to reset chip */ + gpiod_set_raw_value_cansleep(reset_gpio, 0); + udelay(1); + gpiod_set_raw_value_cansleep(reset_gpio, 1); + } else { + /* s/w reset chip if h/w reset is not available */ hi8435_writeb(priv, HI8435_CTRL_REG, HI8435_CTRL_SRST); hi8435_writeb(priv, HI8435_CTRL_REG, 0); - } else { - udelay(5); - gpiod_set_value(reset_gpio, 1); }
spi_set_drvdata(spi, idev);