6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold johan+linaro@kernel.org
commit 77f45cca8bc55d00520a192f5a7715133591c83e upstream.
The WCN6855 firmware on the Lenovo ThinkPad X13s expects the Bluetooth device address in big-endian order when setting it using the EDL_WRITE_BD_ADDR_OPCODE command.
Presumably, this is the case for all non-ROME devices which all use the EDL_WRITE_BD_ADDR_OPCODE command for this (unlike the ROME devices which use a different command and expect the address in little-endian order).
Reverse the little-endian address before setting it to make sure that the address can be configured using tools like btmgmt or using the 'local-bd-address' devicetree property.
Note that this can potentially break systems with boot firmware which has started relying on the broken behaviour and is incorrectly passing the address via devicetree in big-endian order.
The only device affected by this should be the WCN3991 used in some Chromebooks. As ChromeOS updates the kernel and devicetree in lockstep, the new 'qcom,local-bd-address-broken' property can be used to determine if the firmware is buggy so that the underlying driver bug can be fixed without breaking backwards compatibility.
Set the HCI_QUIRK_BDADDR_PROPERTY_BROKEN quirk for such platforms so that the address is reversed when parsing the address property.
Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable@vger.kernel.org # 5.1 Cc: Balakrishna Godavarthi quic_bgodavar@quicinc.com Cc: Matthias Kaehlcke mka@chromium.org Tested-by: Nikita Travkin nikita@trvn.ru # sc7180 Reviewed-by: Douglas Anderson dianders@chromium.org Signed-off-by: Johan Hovold johan+linaro@kernel.org Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/bluetooth/btqca.c | 8 ++++++-- drivers/bluetooth/hci_qca.c | 10 ++++++++++ 2 files changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -758,11 +758,15 @@ EXPORT_SYMBOL_GPL(qca_uart_setup);
int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) { + bdaddr_t bdaddr_swapped; struct sk_buff *skb; int err;
- skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr, - HCI_EV_VENDOR, HCI_INIT_TIMEOUT); + baswap(&bdaddr_swapped, bdaddr); + + skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, + &bdaddr_swapped, HCI_EV_VENDOR, + HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { err = PTR_ERR(skb); bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err); --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -225,6 +225,7 @@ struct qca_serdev { struct qca_power *bt_power; u32 init_speed; u32 oper_speed; + bool bdaddr_property_broken; const char *firmware_name; };
@@ -1787,6 +1788,7 @@ static int qca_setup(struct hci_uart *hu const char *firmware_name = qca_get_firmware_name(hu); int ret; struct qca_btsoc_version ver; + struct qca_serdev *qcadev; const char *soc_name;
ret = qca_check_speeds(hu); @@ -1845,6 +1847,11 @@ retry: case QCA_WCN6855: case QCA_WCN7850: set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); + + qcadev = serdev_device_get_drvdata(hu->serdev); + if (qcadev->bdaddr_property_broken) + set_bit(HCI_QUIRK_BDADDR_PROPERTY_BROKEN, &hdev->quirks); + hci_set_aosp_capable(hdev);
ret = qca_read_soc_version(hdev, &ver, soc_type); @@ -2212,6 +2219,9 @@ static int qca_serdev_probe(struct serde if (!qcadev->oper_speed) BT_DBG("UART will pick default operating speed");
+ qcadev->bdaddr_property_broken = device_property_read_bool(&serdev->dev, + "qcom,local-bd-address-broken"); + if (data) qcadev->btsoc_type = data->soc_type; else