From: Shaik Sajida Bhanu sbhanu@codeaurora.org
[ Upstream commit 67b13f3e221ed81b46a657e2b499bf8b20162476 ]
Whenever SDHC run at clock rate 50MHZ or below, the hardware data timeout value will be 21.47secs, which is approx. 22secs and we have a current software timeout value as 10secs. We have to set software timeout value more than the hardware data timeout value to avioid seeing the below register dumps.
[ 332.953670] mmc2: Timeout waiting for hardware interrupt. [ 332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 332.966450] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00007202 [ 332.973256] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 [ 332.980054] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000027 [ 332.986864] mmc2: sdhci: Present: 0x01f801f6 | Host ctl: 0x0000001f [ 332.993671] mmc2: sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 333.000583] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 333.007386] mmc2: sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 333.014182] mmc2: sdhci: Int enab: 0x03ff100b | Sig enab: 0x03ff100b [ 333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 [ 333.027771] mmc2: sdhci: Caps: 0x322dc8b2 | Caps_1: 0x0000808f [ 333.034561] mmc2: sdhci: Cmd: 0x0000183a | Max curr: 0x00000000 [ 333.041359] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000 [ 333.048157] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 333.054945] mmc2: sdhci: Host ctl2: 0x00000000 [ 333.059657] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000ffffff218 [ 333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP ----------- [ 333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x6000642c | DLL cfg2: 0x0020a000 [ 333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00000000 | DDR cfg: 0x80040873 [ 333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 : 0xf88218a8 Vndr func3: 0x02626040 [ 333.102371] mmc2: sdhci: ============================================
So, set software timeout value more than hardware timeout value.
Signed-off-by: Shaik Sajida Bhanu sbhanu@codeaurora.org Acked-by: Adrian Hunter adrian.hunter@intel.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1626435974-14462-1-git-send-email-sbhanu@codeauror... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci-msm.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index e44b7a66b73c..290a14cdc1cf 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -2089,6 +2089,23 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) sdhci_cqe_disable(mmc, recovery); }
+static void sdhci_msm_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) +{ + u32 count, start = 15; + + __sdhci_set_timeout(host, cmd); + count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL); + /* + * Update software timeout value if its value is less than hardware data + * timeout value. Qcom SoC hardware data timeout value was calculated + * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock. + */ + if (cmd && cmd->data && host->clock > 400000 && + host->clock <= 50000000 && + ((1 << (count + start)) > (10 * host->clock))) + host->data_timeout = 22LL * NSEC_PER_SEC; +} + static const struct cqhci_host_ops sdhci_msm_cqhci_ops = { .enable = sdhci_msm_cqe_enable, .disable = sdhci_msm_cqe_disable, @@ -2438,6 +2455,7 @@ static const struct sdhci_ops sdhci_msm_ops = { .irq = sdhci_msm_cqe_irq, .dump_vendor_regs = sdhci_msm_dump_vendor_regs, .set_power = sdhci_set_power_noreg, + .set_timeout = sdhci_msm_set_timeout, };
static const struct sdhci_pltfm_data sdhci_msm_pdata = {