From: Valentin CARON - foss valentin.caron@foss.st.com
[ Upstream commit a1429f3d3029b65cd4032f6218d5290911377ce4 ]
Modify usart 2 & 3 pins to allow wake up from low power mode while the hardware flow control is activated. UART RTS pin need to stay configure in idle mode to receive characters in order to wake up.
Fixes: 842ed898a757 ("ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl")
Signed-off-by: Valentin Caron valentin.caron@foss.st.com Signed-off-by: Alexandre Torgue alexandre.torgue@foss.st.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 7b4249ed1983..060baa8b7e9d 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1891,10 +1891,15 @@ usart2_idle_pins_c: usart2-idle-2 { pins1 { pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */ - <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins3 { pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ bias-disable; }; @@ -1940,10 +1945,15 @@ usart3_idle_pins_b: usart3-idle-1 { pins1 { pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ - <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */ <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ bias-disable; }; @@ -1976,10 +1986,15 @@ usart3_idle_pins_c: usart3-idle-2 { pins1 { pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ - <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */ <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ bias-disable; };