From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 6cc64f6173751d212c9833bde39e856b4f585a3e ]
On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to a "dolby" button. At the ACPI level an _AEI event-handler is connected which sets an ACPI variable to 1 on both edges. This variable can be polled + cleared to 0 using WMI.
Since the variable is set on both edges the WMI interface is pretty useless even when polling. So instead of writing a custom WMI driver for this the x86-android-tablets code instantiates a gpio-keys platform device for the "dolby" button.
Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010, so that it is not seen as busy when the gpio-keys driver requests it.
Note this replaces a hack in x86-android-tablets where it would call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO controller. acpi_gpiochip_free_interrupts() is considered private (internal) gpiolib API so x86-android-tablets should stop using it.
Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Acked-by: Linus Walleij linus.walleij@linaro.org Acked-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Link: https://lore.kernel.org/r/20230909141816.58358-3-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib-acpi.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index a775d2bdac94f..980ec04892173 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -1655,6 +1655,26 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = { .ignore_wake = "SYNA1202:00@16", }, }, + { + /* + * On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to + * a "dolby" button. At the ACPI level an _AEI event-handler + * is connected which sets an ACPI variable to 1 on both + * edges. This variable can be polled + cleared to 0 using + * WMI. But since the variable is set on both edges the WMI + * interface is pretty useless even when polling. + * So instead the x86-android-tablets code instantiates + * a gpio-keys platform device for it. + * Ignore the _AEI handler for the pin, so that it is not busy. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"), + DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .ignore_interrupt = "INT33FC:00@3", + }, + }, {} /* Terminating entry */ };