5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Elad Nachman enachman@marvell.com
commit 09e23823ae9a3e2d5d20f2e1efe0d6e48cef9129 upstream.
AC5X spec says PHY init complete bit must be polled until zero. We see cases in which timeout can take longer than the standard calculation on AC5X, which is expected following the spec comment above. According to the spec, we must wait as long as it takes for that bit to toggle on AC5X. Cap that with 100 delay loops so we won't get stuck forever.
Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter adrian.hunter@intel.com Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman enachman@marvell.com Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/host/sdhci-xenon-phy.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)
--- a/drivers/mmc/host/sdhci-xenon-phy.c +++ b/drivers/mmc/host/sdhci-xenon-phy.c @@ -109,6 +109,8 @@ #define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST (XENON_EMMC_PHY_REG_BASE + 0x18) #define XENON_LOGIC_TIMING_VALUE 0x00AA8977
+#define XENON_MAX_PHY_TIMEOUT_LOOPS 100 + /* * List offset of PHY registers and some special register values * in eMMC PHY 5.0 or eMMC PHY 5.1 @@ -259,18 +261,27 @@ static int xenon_emmc_phy_init(struct sd /* get the wait time */ wait /= clock; wait++; - /* wait for host eMMC PHY init completes */ - udelay(wait);
- reg = sdhci_readl(host, phy_regs->timing_adj); - reg &= XENON_PHY_INITIALIZAION; - if (reg) { + /* + * AC5X spec says bit must be polled until zero. + * We see cases in which timeout can take longer + * than the standard calculation on AC5X, which is + * expected following the spec comment above. + * According to the spec, we must wait as long as + * it takes for that bit to toggle on AC5X. + * Cap that with 100 delay loops so we won't get + * stuck here forever: + */ + + ret = read_poll_timeout(sdhci_readl, reg, + !(reg & XENON_PHY_INITIALIZAION), + wait, XENON_MAX_PHY_TIMEOUT_LOOPS * wait, + false, host, phy_regs->timing_adj); + if (ret) dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n", - wait); - return -ETIMEDOUT; - } + wait * XENON_MAX_PHY_TIMEOUT_LOOPS);
- return 0; + return ret; }
#define ARMADA_3700_SOC_PAD_1_8V 0x1