4.14-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8159ecab0db9095902d4c73605fb8787f5c7d653 ]
Bit RX_USED set to 0 in the address field allows the controller to write data to the receive buffer descriptor.
The driver does not ensure the ctrl field is ready (cleared) when the controller sees the RX_USED=0 written by the driver. The ctrl field might only be cleared after the controller has already updated it according to a newly received frame, causing the frame to be discarded in gem_rx() due to unexpected ctrl field contents.
A message is logged when the above scenario occurs:
macb ff0b0000.ethernet eth0: not whole frame pointed by descriptor
Fix the issue by ensuring that when the controller sees RX_USED=0 the ctrl field is already cleared.
This issue was observed on a ZynqMP based system.
Fixes: 4df95131ea80 ("net/macb: change RX path for GEM") Signed-off-by: Anssi Hannula anssi.hannula@bitwise.fi Tested-by: Claudiu Beznea claudiu.beznea@microchip.com Cc: Nicolas Ferre nicolas.ferre@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cadence/macb_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 3aabc36eec0b..9046993947cc 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -923,14 +923,19 @@ static void gem_rx_refill(struct macb *bp)
if (entry == bp->rx_ring_size - 1) paddr |= MACB_BIT(RX_WRAP); - macb_set_addr(bp, desc, paddr); desc->ctrl = 0; + /* Setting addr clears RX_USED and allows reception, + * make sure ctrl is cleared first to avoid a race. + */ + dma_wmb(); + macb_set_addr(bp, desc, paddr);
/* properly align Ethernet header */ skb_reserve(skb, NET_IP_ALIGN); } else { - desc->addr &= ~MACB_BIT(RX_USED); desc->ctrl = 0; + dma_wmb(); + desc->addr &= ~MACB_BIT(RX_USED); } }